Black&Decker 9.6-VOLT C/L VSR 3/8" DRILLS BD- 2764
The Tapper® anchoring system is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The Tapper® concrete screw anchor is produced in either hex washer head or Phillips flat head styles from Perma-Seal™ coated or zinc plated carbon steel and type 304 stainless steel. For heavy duty applications, the 3/8 in size is made in zinc plated carbon steel.
-
BrandDeWALT®
-
Manufacturer Part Number2764
-
CountryUSA
-
FinishBlue Perma-Seal
-
MaterialCarbon Steel
-
Thread Size1/4-15
-
Thread TypeUNC
-
Head Drive TypePhillips®/Slotted
-
Head Size3/16 in H x 1/2 in OD
-
Applicable MaterialsNormal-Weight Concrete/Lightweight Concrete/Grouted Concrete Masonry/Hollow Concrete Masonry (CMU)/Solid Brick Masonry/Wood
-
SeriesTapper®
-
Diameter1/4 in
-
Drill Size3/16 in
-
Overall Length2-1/4 in
- High-low thread design
- Good corrosion protection with perma-seal coating
- NO 3 Phillips driver
- 5/16 in fixture clearance hole
-
UNSPSC31161502
-
Package Description100/BX
-
Standards/ApprovalsASTM E488
-
Specification Sheet
Recently Viewed
The Tapper® anchoring system is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The Tapper® concrete screw anchor is produced in either hex washer head or Phillips flat head styles from Perma-Seal™ coated or zinc plated carbon steel and type 304 stainless steel. For heavy duty applications, the 3/8 in size is made in zinc plated carbon steel.
3/4" CROWNED CAM FOLLOWERS-MCGCCF3/4SB>
MAK-A-KEY 300707-305 Metric Undersized Keystock, 305 mm L x 7 mm W x 7 mm H, Carbon Steel, Plain, Metric 296-007
A stock of material that is one foot or greater in length, and from which shaft keys are made. We manufacture keystock to suit every application need you have, in every size, grade and tolerance imaginable. Available in stocked standard sizes or custom made to your specifications.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Midland Industries 80-066 Liquid Filled Pressure Gauge, 0 to 200 psi, 1/4 in Connection, 2-1/2 in Dial, +/- 1.5% Full Scale
Liquid filled gauges enhance the reliability and integrity of the measuring system for long periods. The glycerine filling helps dampen the effects of vibration and pulsation. It also lubricates the movement which extends the life of the gauge. ALL CONNECTIONS ARE BRASS.
DOUBLE SHIELDED BALL BEARING-GULR3AZZ >

