POWERS 1/2" X 6" WEDGE BOLT ANCHORS PWR 7250
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
-
BrandDeWALT®
-
UPC075352305066
-
Manufacturer Part NumberPFM1411480
-
CountryUSA|Canada
-
FinishZinc Plated
-
Tensile Strength2840/3115/3595/4400 lb
-
MaterialSteel
-
Maximum Work Thickness4-1/4 in
-
Minimum Embedment Depth1-3/4 in
-
TypeHigh Performance
-
Head Drive TypeHex
-
Head Size3/4 in
-
Applicable MaterialsNormal Weight Concrete/Sand Lightweight Concrete/Concrete Over Steel Deck/Concrete Masonry/Solid Clay Brick
-
Shear Strength5985/6555/7570/9270/10705 lb
-
Diameter1/2 in
-
Drill Size1/2 in
-
Overall Length6 in
- Designed for standard ANSI tolerance drill bits
- Tough threads for tapping high strength concrete
- Can be installed closer to the edge than traditional expansion anchors
- Fast installation with powered impact wrench
- 1-piece, finished head design
- Patented thread design offers low installation torque
- Ratchet teeth on underside of hex washer head lock against the fixture
- Fully removable and re-installable in same hole
- Diameter, length and identifying marking stamped on head of each anchor
- 5985/6555/7570/9270/10705 lb at 2500/3000/4000/6000/8000 psi in normal weight concrete shear strength
- 2840/3115/3595/4400/4400 lb at 2500/3000/4000/6000/8000 psi in normal weight concrete tensile strength
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 11572557 |
-
UNSPSC31162104
-
Standards/ApprovalsICC-ES ESR-3889|ICC-ES ESR-4042|2015 IBC|2015 IRC|2012 IBC|2012 IRC|2009 IBC|2009 IRC|ACI 355.2|ICC-ES AC193
-
Technical Bulletin
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
MCR Safety stocks a variety of ANSI rated safety vests for your high visibility needs. With an assortment of styles and colors, you can choose a garment that ensures that you show up in a variety of complex backgrounds. It can be a matter of life or death, so be seen in MCR Safety's Hi-Vis apparel. The VCL2ML is an ANSI/ISEA Class 2 value safety vest made of fluorescent lime polyester mesh material. Mesh offers more breathability in warm environments. This vest features a hook & loop front closure, 2 inch silver reflective stripes, 2 outer and 1 inner pocket.
Square D™ DU322 E1 Series Enclosed General Duty Non-Fusible Safety Switch, 240 V AC, 60 A, 10 to 15 hp, 3PST Contact, 3 Poles
Schneider Electric's Square D general duty safety switches are designed for residential and light commercial applications where durability and economy are prime considerations. Typical loads include lighting, air conditioning, and appliances. General duty safety switches feature a quick make, quick break operating mechanism. This single throw safety switch is a non fusible disconnect and has a rated current of 60A for 240VAC. This general duty switch has a 3 wire configuration with 3 poles. The enclosure is surface mounted and is a Type 1. General duty safety switches are UL Listed, and meet or exceed the NEMA Standard KS1.
Morse® Matrix II ZWEDC1014MAT Welded Band Saw Blade, 1/2 in W x 0.025 in THK, 10/14 TPI, Bi-Metal Blade, HSS Tooth
Carlon® UB9AJ SCH 80 Plain End Standard Radius Conduit Elbow, 2 in Trade, 90 deg, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. these premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
Dixon® DCP17 Air Chief Industrial Male Quick Connect Plug, 1/2-14 Nominal, Quick Connect Plug x NPTF, 300 psi Pressure, Steel, Domestic
Dixon® DCP17 Air Chief Industrial Male Quick Connect Plug, 1/2-14 Nominal, Quick Connect Plug x NPTF, 300 psi Pressure, Steel, Domestic
