DeWALT® Screw-Bolt™ PFM1411060 1-Piece Heavy Duty High Performance Screw Anchor, 1/4 in Dia, 2-1/4 in OAL, Hex Washer Head Drive, Carbon Steel, 1 in D Min Embedment
The Screw-Bolt™ anchor is a 1-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt™ is available as bright zinc plated or mechanically galvanized plating. Suitable base materials include normal weight concrete.
-
BrandDeWALT®
-
UPC075352304922
-
Manufacturer Part NumberPFM1411060
-
CountryUSA|Canada
-
FinishZinc Plated
-
MaterialCarbon Steel
-
Minimum Embedment Depth1 in
-
Type1-Piece Heavy Duty High Performance
-
Head Drive TypeHex Washer
-
Head Size21/64 in H
-
Applicable MaterialsBrick Masonry, Concrete Over Steel Deck, Grouted Concrete Masonry, Lightweight Concrete and Normal Weight Concrete
-
Diameter1/4 in
-
Drill Size1/4 in
-
Overall Length2-1/4 in
- Designed for standard ANSI tolerance drill bits
- Low installation torque in concrete and masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Fully removable and reinstallable in same hole
- Diameter, length and identifying marking stamped on head of each anchor
- Patented thread design offers toughened threads for tapping high strength concrete
- Universal product for concrete and grouted/solid masonry
- Can be installed closer to a free edge than traditional expansion anchors
- Fast installation with powered impact wrench, but can also be installed manually
- 1-piece, finished head design
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 11572543 |
-
UNSPSC31161526
-
Standards/ApprovalsACI 318|ACI 355.2|ASTM E488|ASTM B633, SC1 Type II|ESR-388|ESR-4042|IBC/IRC 2018/2015/2012/2009|ICC-ES AC193
-
Specification Sheet
Recently Viewed
DeWALT® Screw-Bolt™ PFM1411060 1-Piece Heavy Duty High Performance Screw Anchor, 1/4 in Dia, 2-1/4 in OAL, Hex Washer Head Drive, Carbon Steel, 1 in D Min Embedment
The Screw-Bolt™ anchor is a 1-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt™ is available as bright zinc plated or mechanically galvanized plating. Suitable base materials include normal weight concrete.
Browning® 1003011 TB Series Arm Type 13 Multiple Sheave With Split Taper Bushing, 3/4 to 2-11/16 in Split Taper Bore, 20.35 in OD, 4 Grooves, 19.8 in (A)/20.3 in (B) Dia Pitch, 3-1/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
DeWALT® Power-Stud® 7410 Mechanical Anchor, 3/8 in Dia, 2-1/4 in OAL, 1-1/4 in L Thread, Carbon Steel, Zinc Plated
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout-filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
DeWALT® 2750 Concrete Anchor Screw, 3/16 in Dia, 3-3/4 in OAL, Phillips®/Slotted Head Drive, Carbon Steel
The Tapper® anchoring system is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The Tapper® concrete screw anchor is produced in either hex washer head or Phillips flat head styles from Perma-Seal™ coated or zinc plated carbon steel and type 304 stainless steel. For heavy duty applications, the 3/8 in size is made in zinc plated carbon steel.
DeWALT® Power-Stud® 7322 Wedge Expansion Anchor, 1/2 in Dia, 3-3/4 in OAL, 2-3/8 in L Thread, 304 Stainless Steel, Galvanized
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
Browning® 1011337 B Series Arm Type 16 Multiple Sheave, 1-1/8 to 3-3/4 in Split Taper Bore, 16.35 in OD, 2 Grooves, 15.8 in (A)/16.3 in (B) Dia Pitch, 1-3/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
