Hollow Wall & Wallboard Anchors
DeWALT® 02346Z Wallboard Anchor, Zinc
The Zip-It anchor is a one-piece self drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy for use with No. 8 screws in 3/8" to 1" thick wallboard. The Zip-It Jr. is also available in engineered nylon and Zamac alloy for use with No. 6 screws in 3/8" to 5/8" wallboard.
POWERS 3/16" in Short Hollow Wall Anchor PWR 2111
The Pollyâ„¢ is a sleeve type Hollow Wall Anchor designed for use in base materials such as plaster, wallboard or hollow tile. Once the anchor has been set, the screw may be removed as often as necessary without affecting the Anchor.
POWERS 3/8" TO 1" WALL NYLON ZIP-ITS PWR 2345
The Zip-It® anchor is a one-piece self-drilling anchor designed for use in hollow gypsum wallboard for light duty loads. It is available in both engineered nylon and Zamac alloy for use with either a no. 6 or no. 8 screws in 3/8 in to 1 in wallboard. The Zip-It® Jr. Is formed from engineered nylon for use with no. 6 screws in 3/8 in to 5/8 in wallboard.
POWERS LARGE POP-TOGGLE ANCHORS PWR 4064
Pop-Toggleâ„¢ fasteners are Hollow Wall Anchors ideal for static applications requiring light to medium load performance. The fastener pre-installs without a screw, allowing for easy placement and removal of the fixture. These fasteners are not recommended for use overhead or applications where holding values are critical.
POWERS NYLON ZIP-ITS W/SCREWS PWR 2348
The Zip-It® anchor is a 1-piece self drilling anchor designed for use in gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy designed for use with No. 8 screws in 3/8 to 1 in THK wallboard. The Zip-It® Jr. is also available in engineered nylon and Zamac alloy designed for use with No. 6 screws in 3/8 to 5/8 in THK wallboard. These fasteners are not recommended for use overhead or applications where holding values are critical.
POWERS ZINC ZIP-ITS W/SCREWS PWR 2349-Z
The Zip-It® anchor is a one piece self-drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy for use with NO 8 screws in 3/8 to 1 in thick wallboard. The Zip-It Jr. is also available in engineered nylon and Zamac alloy for use with NO 6 screws in 3/8 to 5/8 in wallboard.
Recently Viewed
5-PC METRIC FOLD-UP HEX KEY SETS - ALL56077 >
REPLACEMENT WOOD HANDLE FOR POST HOLE DIGGERS. SQUARE EYE WILL FIT SEYMOUR ATLAS, HERCULES, AND PERFECTION DIGGERS, DRILLED.
-JWH707813 >
Appleton® 4S-3/4 Square Box, Steel, 21 cu-in Capacity, (12) Outlets, (12) Knockouts, 4 in H x 4 in W x 1-1/2 in D
Appletonâ„¢ and O-Z/Gedneyâ„¢ metallic switch boxes are widely recognized for quality, selection and ease of installation. They may be used as a junction box or a device box for switches, receptacles, GFCIs, etc. Manufactured of durable materials with consistent construction means easy installation, making all the difference in the speed and final quality of any wiring job.
DeWALT® DW2163 Standard Screwdriver Bit Set With Small ToughCase® System, 37 Pieces, 1/4 in Hex Shank, Steel
SHEAVE WITH BRONZE BEARING, 1" X 1-1/2" , SAFE WORKLOAD 525LBS.-BLK00158 >
POSTHOLE DIGGER HANDLE-JWH702305 >
