Hollow Wall & Wallboard Anchors
POWERS ZINC ZIP-ITS W/SCREWS PWR 2349-Z
The Zip-It® anchor is a one piece self-drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy for use with NO 8 screws in 3/8 to 1 in thick wallboard. The Zip-It Jr. is also available in engineered nylon and Zamac alloy for use with NO 6 screws in 3/8 to 5/8 in wallboard.
POWERS NYLON ZIP-ITS W/SCREWS PWR 2348
The Zip-It® anchor is a 1-piece self drilling anchor designed for use in gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy designed for use with No. 8 screws in 3/8 to 1 in THK wallboard. The Zip-It® Jr. is also available in engineered nylon and Zamac alloy designed for use with No. 6 screws in 3/8 to 5/8 in THK wallboard. These fasteners are not recommended for use overhead or applications where holding values are critical.
POWERS LARGE POP-TOGGLE ANCHORS PWR 4064
Pop-Toggle™ fasteners are Hollow Wall Anchors ideal for static applications requiring light to medium load performance. The fastener pre-installs without a screw, allowing for easy placement and removal of the fixture. These fasteners are not recommended for use overhead or applications where holding values are critical.
POWERS 3/8" TO 1" WALL NYLON ZIP-ITS PWR 2345
The Zip-It® anchor is a one-piece self-drilling anchor designed for use in hollow gypsum wallboard for light duty loads. It is available in both engineered nylon and Zamac alloy for use with either a no. 6 or no. 8 screws in 3/8 in to 1 in wallboard. The Zip-It® Jr. Is formed from engineered nylon for use with no. 6 screws in 3/8 in to 5/8 in wallboard.
POWERS 3/16" in Short Hollow Wall Anchor PWR 2111
The Polly™ is a sleeve type Hollow Wall Anchor designed for use in base materials such as plaster, wallboard or hollow tile. Once the anchor has been set, the screw may be removed as often as necessary without affecting the Anchor.
DeWALT® 02346Z Wallboard Anchor, Zinc
The Zip-It anchor is a one-piece self drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy for use with No. 8 screws in 3/8" to 1" thick wallboard. The Zip-It Jr. is also available in engineered nylon and Zamac alloy for use with No. 6 screws in 3/8" to 5/8" wallboard.
Recently Viewed
ITM 717SP1212 Rotary Hammer Drill Bit, 5 in Drill Bit, 1/2 in Shank Spline Shank, 11 in OAL
ITM 717SP1212 Rotary Hammer Drill Bit, 5 in Drill Bit, 1/2 in Shank Spline Shank, 11 in OAL
2" BANDIT CLAMP STAINLESS STEEL-BNDJ245 >
Stanley Proto JC908A Offset Open Ended Structural Wrench 1-5/16-PROJC908A
#62-3 ROLLER CHAIN CONNECT/LINKS-AMT3062CL>
96 2-BULB STRIP LIGHT FIXTURES-CRSSCF296ESBSU >
Milwaukee® 48-28-6870 Coarse Thread Standard Feed Screw, Model Number Compatibility: 2777, For Use With 1 to 2-9/16 in Self-Feed Bit
Get maximum performance from your Milwaukee® Selfeed drill bits in soft woods and plywood with the coarse thread feed screw. The 1/4 in. replacement feed screw is designed for Selfeed bits sized 1 in. to 2-9/16 in..use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
