Hollow Wall & Wallboard Anchors
The Zip-It anchor is a one-piece self drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy for use with No. 8 screws in 3/8" to 1" thick wallboard. The Zip-It Jr. is also available in engineered nylon and Zamac alloy for use with No. 6 screws in 3/8" to 5/8" wallboard.
The Polly™ is a sleeve type Hollow Wall Anchor designed for use in base materials such as plaster, wallboard or hollow tile. Once the anchor has been set, the screw may be removed as often as necessary without affecting the Anchor.
The Zip-It® anchor is a one-piece self-drilling anchor designed for use in hollow gypsum wallboard for light duty loads. It is available in both engineered nylon and Zamac alloy for use with either a no. 6 or no. 8 screws in 3/8 in to 1 in wallboard. The Zip-It® Jr. Is formed from engineered nylon for use with no. 6 screws in 3/8 in to 5/8 in wallboard.
Pop-Toggle™ fasteners are Hollow Wall Anchors ideal for static applications requiring light to medium load performance. The fastener pre-installs without a screw, allowing for easy placement and removal of the fixture. These fasteners are not recommended for use overhead or applications where holding values are critical.
The Zip-It® anchor is a 1-piece self drilling anchor designed for use in gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy designed for use with No. 8 screws in 3/8 to 1 in THK wallboard. The Zip-It® Jr. is also available in engineered nylon and Zamac alloy designed for use with No. 6 screws in 3/8 to 5/8 in THK wallboard. These fasteners are not recommended for use overhead or applications where holding values are critical.
POWERS ZINC ZIP-ITS W/SCREWS PWR 2349-Z
The Zip-It® anchor is a one piece self-drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy for use with NO 8 screws in 3/8 to 1 in thick wallboard. The Zip-It Jr. is also available in engineered nylon and Zamac alloy for use with NO 6 screws in 3/8 to 5/8 in wallboard.
Recently Viewed
6-PIECE 1/2" -DRIVE HEX DRIVER/HEX BIT SOCKET SET-ARS15605 >
1-1/2" DO-IT FLEX PUTTY KNIFE-JWH772415>
24" #4 GRADUATE COMBINATION SQUARE-STRC33HC244R>
A GALVANIZED HARD DRAWN COMPRESSION SPRING WITH AN OUTSIDE DIAMETER OF 0.687" AND AN OVERALL LENGTH OF 1.500"
-AJA39 >
Ingersoll Rand 115-183 Retainer, For Use With 115, 116, 117 Air Percussive Hammer
Ingersoll Rand 115-183 Retainer, For Use With 115, 116, 117 Air Percussive Hammer
metabo® 674716000 Pro 4 2-Cutter Hammer Drill Bit, 1/2 in Drill Bit, Chisel Cutting, SDS-Plus® Shank, 8 in D Cutting, Carbide Cutting Edge, 10 in OAL
metabo® 674716000 Pro 4 2-Cutter Hammer Drill Bit, 1/2 in Drill Bit, Chisel Cutting, SDS-Plus® Shank, 8 in D Cutting, Carbide Cutting Edge, 10 in OAL
