Appleton® ETP™ 8468C Raised Square Box Cover, 4 in L x 4 in W x 5/8 in D, Steel
Appleton® ETP™ 8468C Raised Square Box Cover, 4 in L x 4 in W x 5/8 in D, Steel
-
BrandAppleton®
-
UPC687855776757
-
Manufacturer Part Number8468C
-
CountryUSA
-
Capacity4.5 cu-in
-
FinishGalvanized
-
MaterialSteel
-
TypeRaised
-
Width4 in
-
Number of Gangs1
-
ShapeSquared
-
Depth5/8 in
-
Length4 in
- Boxes with concentric or eccentric knockouts are suitable for bonding without any additional bonding means where used in circuits above or below 250 VAC
- Unless otherwise noted all concentric or eccentric knockouts are 1/2 to 3/4 in combinations
- Single and double gang metallic outlet and switch boxes are acceptable for use in two hr fire rated walls
- Groundskeeper raised ground feature on boss inside box provides one or two #10-32 tapped hole, allowing a 3/8 in long green ground screw to be threaded into box without contacting mounting surface
- Other boxes provided with flat ground tapped hole, except plenum boxes
- Single device
- Plaster rings/mud rings
- Drawn construction
-
Alternative Part Number8994847
-
UNSPSC39121304
-
IDEA Index ID8994847
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|UL 514A File No. E2527|NEMA OS-1
-
Specification Sheet
Recently Viewed
Appleton® ETP™ 8468C Raised Square Box Cover, 4 in L x 4 in W x 5/8 in D, Steel
Appleton® ETP™ 8468C Raised Square Box Cover, 4 in L x 4 in W x 5/8 in D, Steel
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Appleton® ETP™ 8373N Raised Square Box Cover, 4 in L x 4 in W x 1/2 in D, Duplex Receptacle/GFCI Device Cover, Steel
Appleton® ETP™ 8373N Raised Square Box Cover, 4 in L x 4 in W x 1/2 in D, Duplex Receptacle/GFCI Device Cover, Steel
Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 5" with Insulated Handle.
Appleton® UNILETS™ FD175 Type FD Deep Heavy Duty Device Box With Internal Ground Screw, Malleable Iron, 25 cu-in Capacity, 1 Gangs, 1 Outlets, 1 Knockouts, 4.56 in H x 2.81 in W x 2.69 in D
Appleton® ETP™ 8468A Raised Square Box Cover, 4 in L x 4 in W x 1/2 in D, Steel
Appleton® ETP™ 8468A Raised Square Box Cover, 4 in L x 4 in W x 1/2 in D, Steel
