Appleton® ETP™ 8363 Raised Electrical Box Cover, 4 in L x 4 in W x 1/2 in D, Single Receptacle Cover, Steel
Appleton® ETP™ 8363 Raised Electrical Box Cover, 4 in L x 4 in W x 1/2 in D, Single Receptacle Cover, Steel
-
BrandAppleton®
-
UPC687855774753
-
Manufacturer Part Number8363
-
CountryUSA
-
Capacity7 cu-in
-
FinishGalvanized
-
MaterialSteel
-
TypeRaised
-
Mounting TypeSurface
-
Cover TypeSingle Receptacle
-
Width4 in
-
Number of Gangs1
-
ShapeSquared
-
Depth1/2 in
-
Length4 in
- Boxes with concentric or eccentric knockouts are suitable for bonding without any additional bonding means where used in circuits above or below 250 VAC
- Unless otherwise noted all concentric or eccentric knockouts are 1/2 - 3/4 in combinations
- Single and 2-gang metallic outlet and switch boxes are acceptable for use in two-hour fire rated walls
- Groundskeeper raised ground feature on boss inside box provides one or two #10-32 tapped hole, allowing a 3/8 in long green ground screw to be threaded into box without contacting mounting surface
- Other boxes provided with flat ground tapped hole except plenum boxes
- 1/2 in raise for single flush receptacle
-
Alternative Part Number8994725
-
UNSPSC39121304
-
IDEA Index ID8994725
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|NEMA OS-1/FB-1|UL 514|E2527
-
Specification Sheet
Recently Viewed
Appleton® ETP™ 8363 Raised Electrical Box Cover, 4 in L x 4 in W x 1/2 in D, Single Receptacle Cover, Steel
Appleton® ETP™ 8363 Raised Electrical Box Cover, 4 in L x 4 in W x 1/2 in D, Single Receptacle Cover, Steel
22-PIECE HEX KEY SET-ALL56009 >
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
Milwaukee® 2836-20 M18™ FUEL™ Electric Cordless Oscillating Multi-Tool, 10000 to 20000 opm Speed, 18 V, Li-Ion Battery, No Battery Included,
The MILWAUKEE® M18 FUEL™ Oscillating Multi-Tool generates the fastest cuts, the power for demolition, and the lowest full tool vibration. The POWERSTATE™ Brushless Motor delivers 10,000 to 20,000 OPM with an aggressive 4.2-degree oscillation angle to deliver the fastest cuts over the competition. The cordless multi-tool also delivers the power to complete many demanding applications with ease, such as large cuts through hardwoods and nail embedded wood, pushing the limits of what a multipurpose oscillating tool can do. Vibration dampening technology delivers the lowest full tool vibration, making cuts more comfortably with less fatigue. REDLINK PLUS™ Intelligence achieves unmatched levels of performance, protection, and compatibility. The M18™ REDLITHIUM™ XC5.0 battery (not included) delivers more work per charge than competitive batteries on the market when used with the multitool. The M18 FUEL™ Oscillating Multi-Tool has a 10-Setting Dial with an additional Auto-Load Feature, allowing users to adjust the speed to the application. An integrated 180-degree LED light provides maximum visibility in low-light situations.
1-1/2" SUPER SOFT GRAY SOFT FACE HAMMER TIP
T-12" UNIVERSAL END CAPS-BULENDCAP >
