Wagner by Diversitech WG840590 Direct Drive Furnace Blower Motor, OAO Enclosure, 3/4 hp, 208/230 V AC, 60 Hz, 1 ph, 48 Frame, 1075 rpm Speed, Belly Band/Shaft Up/Down Mount
This Wagner® WG840590 Direct Drive Furnace Blower Motors, 3/4 HP, 1075/3 RPM, 4.0 FLA, 208 - 230V motor installs with all standard 48 frame mounting brackets. It is protected by an automatic overload and class B insulation. The motor is electrically reversible and features 36 in. leads to ease installation.
-
BrandWagner by Diversitech
-
Manufacturer Part NumberWG840590
-
CountryUSA
-
Temperature Rating140 deg F
-
Frame48
-
Frequency Rating60 Hz
-
Mounting TypeBelly Band/Shaft Up/Down
-
RotationReversible
-
Voltage Rating208/230 V AC
-
Amperage Rating5.4 A Full Load
-
Application TypeCondenser Fan Motors
-
Service Factor1
-
Horsepower3/4 hp
-
Shaft Size1/2 in Dia x 4-1/2 in L
-
Dimensions5.59 in Dia x 10.39 in L
-
Bearing TypeSleeve
-
Number of Speeds3
-
Insulation ClassClass B
-
Speed1075 rpm
-
Enclosure TypeOAO
-
Phase1
- Motors feature reversing plugs, extended thru bolts, 36 in leads and low power consumption
- Ball bearing design allows for greater heat endurance, improved performance, increased reliability, and enhanced motor life
- Extended mounting bolts provides easier installation in cramped spaces and allows the installer to start the threaded mounting nut quickly and efficiently
-
UNSPSC26101100
-
Package DescriptionEACH
-
Warranty2 Years
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
This Wagner® WG840590 Direct Drive Furnace Blower Motors, 3/4 HP, 1075/3 RPM, 4.0 FLA, 208 - 230V motor installs with all standard 48 frame mounting brackets. It is protected by an automatic overload and class B insulation. The motor is electrically reversible and features 36 in. leads to ease installation.
3.5-LITER / 8-LITER DISPENSER (EA)-SAN92112 >
Husky CF0620B Water-Resistant Sheeting, 100 ft L x 20 ft W x 6 mil THK, Polyethylene
Provides smooth operation and maximum tool control
Double cut (Alternate cut) is the most popular bur in ferrous applications
Manufactured with cuts made on the left and right spirals to produce a finer finish on material resulting in smaller chips and slivers
Excellent for confined or hard-to-reach areas
Use for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
Tungsten carbide construction for long life and durability
High quality manufacturing method delivers vibration-free operation
Precision ground with diamond wheels to produce a very sharp uniform cutting edge
Each enclosed in individual plastic capsules for storage and protection
VITON O-RINGS
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
