General Purpose AC Motors
Century® SD112 4-Pole Continuous Duty Motor, Totally Enclosed Fan Cooled Enclosure, 5 hp, 208 to 230/460 V, 60 Hz, 3 Phase, 184T Frame, 1758 rpm Speed, Rigid Base Mount
Marathon® 048S17D2107 Drip Proof Split Phase Fan and Blower Motor, 1/4 hp, 115 VAC, 60 Hz, 1 ph, 48Z Frame, 1725 rpm, Base Mount, DP Enclosure
Diversitech WG840739HT High Temperature Condenser Fan Motor, 3/4 hp, 460 V AC, 60 Hz, 48 Frame, 1075 rpm Speed
These motors install with all standard 48 frame mounting brackets. They are a quiet operator and electrically reversible. There is an Automatic Thermal Overload Protector and they have class B insulation. They have 30 in leads and 60 Hz with low power consumption. The motor has a standard 48 frame motor casing size and has drain holes with plugs on both end plates. There is a continuous air over on this motor and a 70 deg C Ambient Design with Extended Studs.
Techtop BL3-AL-TF-56C-4-B-D-.5 EPAct AC Motor, TEFC Enclosure, 1/2 hp, 208 to 230/460 V AC, 60 Hz, 56C Frame, 1800 rpm Speed, Rigid/C-Flange Mount
Techtop BL3-AL-TF-56C-4-B-D-.5 EPAct AC Motor, Totally Enclosed Fan Cooled Enclosure, 1/2 hp, 208 to 230/460 VAC, 60 Hz, 56C Frame, 1800 rpm Speed, Rigid/C-Flange Mount
Techtop BL3-AL-TF-56C-4-B-D-.75 EPAct AC Motor, TEFC Enclosure, 3/4 hp, 208 to 230/460 V AC, 60 Hz, 56C Frame, 1800 rpm Speed, Rigid/C-Flange Mount
Techtop BL3-AL-TF-56C-4-B-D-.75 EPAct AC Motor, Totally Enclosed Fan Cooled Enclosure, 3/4 hp, 208 to 230/460 VAC, 60 Hz, 56C Frame, 1800 rpm Speed, Rigid/C-Flange Mount
Techtop GR3-CI-TF-182T-4-B-D-3 AC Motor With Class H Stator, TEFC Enclosure, 3 hp, 230/480 V AC, 60 Hz, 182T Frame, 1800 rpm Speed, Rigid Mount
Techtop GR3-CI-TF-182T-4-B-D-3 AC Motor With Class H Stator, Totally Enclosed Fan Cooled Enclosure, 3 hp, 230/480 VAC, 60 Hz, 182T Frame, 1800 rpm Speed, Rigid Mount
Techtop GR3-CI-TF-184T-4-B-D-5 AC Motor With Class H Stator, TEFC Enclosure, 5 hp, 230/480 V AC, 60 Hz, 184T Frame, 1800 rpm Speed, Rigid Mount
Techtop GR3-CI-TF-184T-4-B-D-5 AC Motor With Class H Stator, Totally Enclosed Fan Cooled Enclosure, 5 hp, 230/480 VAC, 60 Hz, 184T Frame, 1800 rpm Speed, Rigid Mount
Recently Viewed
ITM 207SP0060 Heavy Duty Drill Bit, #60 Drill - Wire, 0.0400 Drill - Decimal Inch, 135 deg Point Angle, M2 HSS, Black Oxide
ITM 207SP0060 Heavy Duty Drill Bit, #60 Drill - Wire, 0.0400 Drill - Decimal Inch, 135 deg Point Angle, M2 HSS, Black Oxide
BBI 486126 Lag Bolt, 1/4-10, 2 in OAL, Low Carbon Steel, Zinc Plated (CR+3)
BBI 319800 Hex Nut, 2-12, Low Carbon Steel, Zinc CR+3, 2 Material Grade
10-32" X 1-3/4" Phillips Head Slotted Machine Screw
Milwaukee®'s Spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
