MORSE® 92510 2047G General Purpose Spiral Point Tap, Right Hand Cutting, 5/8-11 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
MORSE® 92510 2047G General Purpose Spiral Point Tap, Right Hand Cutting, 5/8-11 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
-
BrandMORSE®
-
UPC686125925109
-
Manufacturer Part Number92510
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length1-13/16 in
-
MaterialHSS
-
Thread LimitH3
-
Thread Size5/8-11
-
Thread StandardGround/UNC
-
Chamfer TypePlug
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2047G
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length3-13/16 in
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- TiN - titanium nitride is an excellent coating for machining a wide variety of materials at greatly increased speeds and feeds
- Increases tool surface hardness, lubricity and heat resistance and resists chip welding
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 92510 2047G General Purpose Spiral Point Tap, Right Hand Cutting, 5/8-11 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
MORSE® 92510 2047G General Purpose Spiral Point Tap, Right Hand Cutting, 5/8-11 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
Porter-Cable® 5507 General Purpose Pilot Hole Bit, For Use With 552 Production Pocket Cutter, 4 in OAL
36" X 84 DOOR WEATHERSTRIP KIT-M-D01438 >
Bore Diameter: 55 mm Outer Diameter: 90 mm Width / Thickness: 18 mm Sealing: Rubber contact seals (2RS/2RS1) on both sides to keep dust out and grease in Max Speed: Up to 4,500 RPM (limiting speed) Temperature Range: -20 °C to +120 °C (-4 °F to +248 °F)
FLAT WHITE SPRAY PAINT-PLAT24 >
OIL RESISTANT , ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES . IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA101K>
