ShearTap™ 94410 2090G Spiral Point Tap, Right Hand Cutting, #10-24 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
ShearTap™ 94410 2090G Spiral Point Tap, Right Hand Cutting, #10-24 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
-
BrandShearTap™
-
UPC686125944100
-
Manufacturer Part Number94410
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length1/2 in
-
MaterialHSS
-
Thread LimitH3
-
Thread Size#10-24
-
Thread StandardUNC
-
Chamfer TypePlug
-
Measurement SystemImperial
-
Series2090G
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2-3/8 in
- ShearTap™ offers exceptional value for high volume tapping
- The geometry is optimized for long chipping steels and stainless steels up to a hardness of 35Rc
- Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- Plug style (3 to 5 thread chamfer) is the most common chamfer used for tapping applications in through holes and blind holes with sufficient bottom clearance
- CNC reduced neck design enhances chip evacuation and cutting fluid flow to the cutting teeth for reduced friction, heat and galling
- Also reduces contact between the tap and the workpiece
- TiN - titanium nitride is an excellent coating for machining a wide variety of materials at greatly increased speeds and feeds
- Increases tool surface hardness, lubricity and heat resistance and resists chip welding
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
ShearTap™ 94410 2090G Spiral Point Tap, Right Hand Cutting, #10-24 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
ShearTap™ 94410 2090G Spiral Point Tap, Right Hand Cutting, #10-24 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
Model / Series: 10-2Nominal Outside Diameter: 9-7/8 inches Compatible Wire Rope Size: 1/2 inch Shaft (Bore) Size: 1-1/2 inches Rim Width: 1-3/4 inches Hub Width: 1-5/8 inches Nominal Hub Outside Diameter: 2-9/16 inches Nominal Tread Diameter: 8-5/16 inches Material: Forged Steel (F.S.) Approximate Weight: 14.50 lbs
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
4" X 5" PIPE INCREASERS. LARGE END IS CRIMPED. FOR USE WITH SINGLE WALL PIPE. 24 GAUGE-JWH411263 >
#16 BRASS PLATED JACK CHAIN (FT)-TCI10307 >
#10-#12 1/4" SLOTTED BITS-MGN27503>
