MORSE® 98506 7501G General Purpose Spiral Point Tap, M5x0.8 Thread, D4 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
MORSE® 98506 7501G General Purpose Spiral Point Tap, M5x0.8 Thread, D4 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
-
BrandMORSE®
-
UPC686125985066
-
Manufacturer Part Number98506
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length7/8 in
-
MaterialHSS
-
Thread LimitD4
-
Thread SizeM5x0.8
-
Thread StandardGround
-
Chamfer TypePlug
-
Measurement SystemMetric
-
TypeGeneral Purpose
-
Series7501G
-
Number of Flutes2
-
Overall Length2-3/8 in
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- TiN - titanium nitride is an excellent coating for machining a wide variety of materials at greatly increased speeds and feeds
- Increases tool surface hardness, lubricity and heat resistance and resists chip welding
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 98506 7501G General Purpose Spiral Point Tap, M5x0.8 Thread, D4 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
MORSE® 98506 7501G General Purpose Spiral Point Tap, M5x0.8 Thread, D4 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
24" LOCK RING TOOL TIRE SPOON - KEN32123>
MORSE® 92535 2070G General Purpose Spiral Point Tap, Right Hand Cutting, #10-32 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
MORSE® 92535 2070G General Purpose Spiral Point Tap, Right Hand Cutting, #10-32 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
5/16" HOLLOW STEEL PUNCHES-GNL1280H>
Drillco 215A124CP 2105 Spiral Point Tap, Right Hand Cutting, Oversized 3/8-16 Thread, Plug Chamfer, 3 Flutes, Bright, HSS
Oversize taps are similar in design to a standard tap, but with a pitch diameter that is usually 0.0050” to 0.0055” larger than standard. Oversize taps are used primarily where a part will be plated or treated after tapping.
ShearTap™ 94544 2090G Oversized Spiral Point Tap, Right Hand Cutting, #8-32 Thread, H7 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
ShearTap™ 94544 2090G Oversized Spiral Point Tap, Right Hand Cutting, #8-32 Thread, H7 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
