Starrett TAP WRENCHES STR 91-C
The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size.
-
BrandStarrett®
-
UPC049659504217
-
Manufacturer Part Number91C
-
CountryUSA|Canada
-
FinishNickel Plated
-
MaterialTool Steel
-
Handle TypeBar
-
Series91 Series
-
Length12 in
-
Tap Capacity1/4 to 5/8 in
- Strong and well-proportioned
- Tempered gripping surfaces firmly hold square or round shanks
- Plunger operated by knurled sleeve
- Spring inside sleeve causes plunger to back off when pressure is removed
- Round shanks can be gripped, but care must be used
- Excessive pressure may break the moveable V-jaw
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 00265389 |
| Grainger | 3X031 |
-
Alternative Part Number50421
-
UNSPSC27111700
-
Package DescriptionEACH
-
Standards/ApprovalsPROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
-
Full Engineering Drawing
Recently Viewed
The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size.
Edison's UL Class J fuse products are offered in both Dual-Element Time-Delay (JDL) and Fast-Acting (JFL) types. Both types have 200,000 amp interrupting rating at 600Vac RMS Sym amps. Their small physical size and high performance characteristics makes Class J fuses ideal for any space-limited applications. Edison's JFL fuses are best suited for the protection of non-inductive loads such as resistive heating and lighting circuits.
Dodge® 083352 First Stage Pinion Gear, 16 Diametral Pitch, 13 Teeth, 1-1/2 in Dia Pitch
Dodge® 083352 First Stage Pinion Gear, 16 Diametral Pitch, 13 Teeth, 1-1/2 in Dia Pitch
9-OZ. 5-MINUTE EPOXY. DRIES CLEAR. BONDS IN 4-7 MINUTES-JWH328073 >
SINGLE GROOVE H-BUSH A-BELT SHEAVES-IDCAK071H >
5-GRV BANDED 3-V-1320 V-BELT-GAT5/3V1320 >
