Round Dies
Irwin® Hanson® 4267 Adjustable Round Threading Die, 1-14 Thread UNS Thread, 2 in OD Die, High Carbon Steel
Drillco 30E120CC 3000E Adjustable Round Split Die, 5/16-18 UNC Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 30E124CC 3000E Adjustable Round Split Die, 3/8-16 UNC Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E025AB 3100E Adjustable Round Split Die, M2.5x0.45 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E030AB 3100E Adjustable Round Split Die, M3.0x0.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E035BB 3100E Adjustable Round Split Die, M3.5x0.6 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E040AB 3100E Adjustable Round Split Die, M4x0.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E040BB 3100E Adjustable Round Split Die, M4x0.7 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E045BB 3100E Adjustable Round Split Die, M4.5x0.75 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E050BB 3100E Adjustable Round Split Die, M5x0.8 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E060BB 3100E Adjustable Round Split Die, M6x0.75 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E080CB 3100E Adjustable Round Split Die, M8x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E090BB 3100E Adjustable Round Split Die, M9x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100CB 3100E Adjustable Round Split Die, M10x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100DB 3100E Adjustable Round Split Die, M10x1.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100DC 3100E Adjustable Round Split Die, M10x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E110BB 3100E Adjustable Round Split Die, M11x1.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E120BC 3100E Adjustable Round Split Die, M12x1.25 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E120CC 3100E Adjustable Round Split Die, M12x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E120DC 3100E Adjustable Round Split Die, M12x1.75 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E140CC 3100E Adjustable Round Split Die, M14x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Recently Viewed
Proto® TorquePlus™ J5418MH Standard Length Socket, Metric, 1/2 in Square Drive, 18 mm
5/8" X #33-JT A-4133 STRAIGHT SHANK ARBOR - JAC7360>
2" GASKETS-TEA2FFG>
2" NEO GASKETS-TEA2FFN>
Proto® TorquePlus™ J7224H Standard Length Socket, Imperial, 3/8 in Square Drive, 3/4 in
30426 JACOBS is an industrial Archer Series 600 (Model 642) Morse Taper Drill Sleeve. It is a high-precision reducing sleeve used to adapt smaller taper-shank cutting tools into larger machine spindles
642 DRILL SLEEVE #4 MT-JAC30426>
