Band Saw Blade Coil Stock
Starrett® 95419-100 Band Saw Blade Coil Stock, 3/4 in W x 0.032 in THK, 100 ft L Coil, Carbide Tooth
100 Ft. Coil, Advanz™ CG Carbide Grit Band Saw Blade Material - 3/4" width, .032" thickness, Continuous edge, Carbide Medium Grit. Made with a tungsten carbide grit bonded to an alloy back. Cuts through many hard or abrasive materials that conventional tooth blades won't cut.
Starrett® 91361-100 Band Saw Blade Coil Stock, 1/2 in W x 0.025 in THK, 6 TPI, High Carbon Steel Blade, 100 ft L Coil
100 Ft. Coil, Duratec™ SFB Carbon Band Saw Material - 1/2" Width, .025" Thickness, 6 TPI, Regular profile, Raker Set, Straight (Zero) Rake Angle. Made from carbon steel with a flexible back, Duratec™ SFB is ideal for economical cutting on easy-to-machine ferrous or nonferrous metal and wood. It is available in a wide range of widths, thickness, pitches and welded-to-length sizes for general purpose contour and straight cutting on a variety of machines.
Morse® QuikSilver® HB 663418 Band Saw Blade Coil Stock, 1/2 in W x 0.025 in THK, 18 TPI, High Carbon Steel Blade, 250 ft L Coil
Morse® QuikSilver® HB 663418 Band Saw Blade Coil Stock, 1/2 in W x 0.025 in THK, 18 TPI, High Carbon Steel Blade, 250 ft L Coil
Morse® QuikSilver® ZHBBR18-100 Band Saw Blade Coil Stock, 3/8 in W x 0.025 in THK, 18 TPI, 100 ft L Coil, Carbon Steel Tooth
Morse® Matrix II ZWEAC1014MAT-100 Band Saw Blade Coil Stock, 1/4 in W x 0.025 in THK, 10/14 TPI, 100 ft L Coil, Bi-Metal Blade
Morse® QuikSilver® ZHBDR14-100 Band Saw Blade Coil Stock, 1/2 in W x 1/4 in THK, 14 TPI, 100 ft L Coil, Carbon Steel Tooth
M.K. Morse 1/2" 10/14T BANDSAW BLADE--RL/100' MOR Z-WED-C-1014-MAT-100
Morse® Matrix II 393413100C Band Saw Blade Coil Stock, 1/2 in W x 0.02 in THK, 10/14 TPI, 100 ft L Coil, HSS Tooth
Recently Viewed
5-J-3/4 S-flex Shaft Coupling Half 3/4"
S-FLEX SHAFT COUPLING HALF 3/4" INCH-LOV5J3/4 >
Browning® 1111962 A Plate Sprocket, 60 Chain, 35 Teeth, For Use With T55L Torque Limiters, 8.78 in OD
Remke Tuff-Seal™ 7303-008R Closed Mesh Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.22 to 0.32 in Cable, For Use With 1/2 in NPT Connector, Aluminum
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Browning® 1111921 A Plate Sprocket, 60 Chain, 22 Teeth, For Use With T45L Torque Limiters, 5.67 in OD
Littelfuse® POWR-GARD® LFR60200-1C Fuse Block, 600 V AC, 200 A, Class: R, 6 AWG to 250 kcmil Wire, 1 Poles
The new Littelfuse® class H and R blocks offer many advantages over previous generations that are noted in the features and benefits section. Class H and class R fuse blocks are dimensionally the same, but class R blocks incorporate A rejection feature, which only allows class R fuses to be inserted.
HCI Preferred Supplier 200-AAL A1 6191X Cam and Groove Adapter, 2 in Nominal, Male Adapter x FNPT End Style, Aluminum
HCI Preferred Supplier CGA-200-A1 6191X Cam and Groove Adapter, 2 in Nominal, Male Adapter x FNPT End Style, Aluminum
