MORSE® 42110 1882 Center Cutting Double End Regular Length End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 3 Flutes, 7/8 in Dia Shank, 6-1/8 in OAL, Bright
MORSE® 42110 1882 Center Cutting Double End Regular Length End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 3 Flutes, 7/8 in Dia Shank, 6-1/8 in OAL, Bright
-
BrandMORSE®
-
UPC686125421106
-
Manufacturer Part Number42110
-
CountryUSA
-
FinishBright
-
MaterialHSS
-
Flute TypeSpiral
-
TypeCenter Cutting Double End Regular Length
-
Helix Angle30 deg
-
Series1882
-
Cutter Diameter7/8 in
-
Shank Diameter7/8 in
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Shank TypeRound/Weldon Flat
-
Length of Cut1-7/8 in
-
Overall Length6-1/8 in
- Provides a compromise between the chip capacity of 2-flute end mills and the improved surface finish, greater core strength and higher feed rate of multi-flute end mills
- Allows for plunge cutting like a drill into solid materia
-
UNSPSC23242511
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 42110 1882 Center Cutting Double End Regular Length End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 3 Flutes, 7/8 in Dia Shank, 6-1/8 in OAL, Bright
MORSE® 42110 1882 Center Cutting Double End Regular Length End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 3 Flutes, 7/8 in Dia Shank, 6-1/8 in OAL, Bright
MORSE® 43383 1897M Center Cutting Regular Length Single End End Mill, 17 mm Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-3/4 in OAL, Bright
MORSE® 43383 1897M Center Cutting Regular Length Single End End Mill, 17 mm Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-3/4 in OAL, Bright
Dichtomatik N70145 O-Ring, 145 Dash Number, 2.55 in ID x 2.756 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
MORSE® 43560 1897 Non-Center Cutting Regular Length Single End End Mill, 2 in Dia Cutter, 2 in Length of Cut, 8 Flutes, 3/4 in Dia Shank, 4-1/16 in OAL, Bright
MORSE® 43560 1897 Non-Center Cutting Regular Length Single End End Mill, 2 in Dia Cutter, 2 in Length of Cut, 8 Flutes, 3/4 in Dia Shank, 4-1/16 in OAL, Bright
Dichtomatik N70314 O-Ring, 314 Dash Number, 0.725 in ID x 1.147 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik N70206 O-Ring, 206 Dash Number, 0.484 in ID x 0.762 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
