Drillco 445E140 4450E Imperial Hand Reamer, 5/8 in Dia x 7 in OAL, Square Shank, Spiral Flute
Hand Reamers are widely used for final sizing of drilled holes. The square on the shank end is suitable for holding in a tap wrench or vise. The cutting edge is ground with a starting taper to provide easy entry.
-
BrandDrillco
-
UPC045997099309
-
Manufacturer Part Number445E140
-
CountryUSA|Canada
-
FinishUncoated
-
MaterialHSS
-
Flute Length3-1/2 in
-
Flute TypeSpiral
-
TypeImperial
-
Series4450E
-
Shank TypeSquare
-
Diameter5/8 in
-
Overall Length7 in
- Made with general purpose HSS
- Spiral flutes for faster chip ejection and cutting operation
- Regularly pointed with a 45 chamfer
- Square shank for easy use with tap wrench
-
UNSPSC27112837
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
Drillco 445E140 4450E Imperial Hand Reamer, 5/8 in Dia x 7 in OAL, Square Shank, Spiral Flute
Hand Reamers are widely used for final sizing of drilled holes. The square on the shank end is suitable for holding in a tap wrench or vise. The cutting edge is ground with a starting taper to provide easy entry.
Dichtomatik 75102145 O-Ring, 223 Dash Number, 1.609 in ID x 1.887 in OD, FKM, 75 Shore A Durometer, Import, Customer 223-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
The vitrified bonding technique uses a high temperature process whereby abrasive materials are heated to a point where the grains fuse to each other, forming the bond posts. Vitrified products, although somewhat brittle are not affected by water, oil, most acids or temperature changes. Used primarily for precision and fixed feed applications, they are particularly well suited for bench grinders and offhand tool room applications.
Dichtomatik 75102143 O-Ring, 221 Dash Number, 1.421 in ID x 1.699 in OD, FKM, 75 Shore A Durometer, Import, Custom 221-viton
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Our most popular 1/4” grinding wheel, the United Abrasives A24R is a great choice for long lasting, general purpose grinding. The A24R is composed of a special aluminum oxide grain which assures consistent stock removal for tough applications. United Abrasives/SAIT wheels are externally reinforced with fiberglass layers to provide ultimate safety. Proudly manufactured in the USA.
