Klein® KTSB14 Step Drill Bit, 3/16 in Dia Min Hole, 7/8 in Dia Max Hole, Steel, 3/8 in Shank
Straight, Double Fluted Step Drill Bits from Klein Tools provide cleaner cutting and drilling. The aluminum titanium coating is 10 times more durable than steamed black oxide for longer bit life. 3/8-Inch hex shank is durable, and has a firm, positive grip. Laser-etched markings provide quick size identification on primary holes. This step bit has 12-hole sizes from 3/16-Inch to 7/8-Inch (4.8 to 22.2 mm).
-
BrandKlein®
-
UPC092644591143
-
Manufacturer Part NumberKTSB14
-
CountryUSA|Canada
-
Point TypeSplit
-
MaterialSteel
-
Maximum Hole Diameter7/8 in
-
Minimum Hole Diameter3/16 in
-
ColorSilver
-
Applicable MaterialsSteel, Brass, Aluminum, Copper, Plastic and Wood
-
Number of Flutes2
-
Shank Size3/8 in
-
Cutting DirectionRight Hand
-
Cutting Edge MaterialHSS
-
Number of Hole Sizes12
-
Number of Steps12
-
Drill Diameter Measurement SystemImperial
-
Step Depth1/8 in
-
Letter/Wire Size#14
-
Shank TypeHex
-
Overall Length7.3 in
- Two flutes cut faster and keep bit cooler
- Fast-starting, non-walking drill tip
- High visibility silver step targets for primary hole sizes
- Thick 3/8 in hex shank provides a firm, positive grip and won't spin out in the drill
- Works in most metals
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 335Y94 |
-
UNSPSC20111614
-
Alternative Part Number13488655
-
IDEA Index ID13488655
-
Package DescriptionEACH
-
Standards/ApprovalsIEC60825-1|PROP65: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information
-
Catalog
Recently Viewed
Klein® KTSB14 Step Drill Bit, 3/16 in Dia Min Hole, 7/8 in Dia Max Hole, Steel, 3/8 in Shank
Straight, Double Fluted Step Drill Bits from Klein Tools provide cleaner cutting and drilling. The aluminum titanium coating is 10 times more durable than steamed black oxide for longer bit life. 3/8-Inch hex shank is durable, and has a firm, positive grip. Laser-etched markings provide quick size identification on primary holes. This step bit has 12-hole sizes from 3/16-Inch to 7/8-Inch (4.8 to 22.2 mm).
Milwaukee® 48-20-5160 Heavy Duty Thick Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5175 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
Vaughan® 12320 Framing Hammer, Milled Face, 24 oz, Straight Claw, Hickory Wood Handle
Vaughan® 12320 Framing Hammer, Milled Face, 24 oz, Straight Claw, Hickory Wood Handle
Greenlee® Kwik Stepper® 36020 Multi-Hole Step Bit, 13/32 in Dia Min Hole, 1.201 in Dia Max Hole, 8 Steps
Greenlee® Kwik Stepper® 36020 Multi-Hole Step Bit, 13/32 in Dia Min Hole, 1.201 in Dia Max Hole, 8 Steps
1-QT STAIN-OFF STAIN REMOVER-ML-CC902QT >
Starrett® B4-4R Inch Reading Combination Square Blade, 4 in L Steel Blade, 8ths, 16ths, Quick-Reading 32nds, 64ths Graduation
Starrett® B4-4R Inch Reading Combination Square Blade, 4 in L Steel Blade, 8ths, 16ths, Quick-Reading 32nds, 64ths Graduation






