Milwaukee 3-1/2" CARBIDE THICK WALL CORE BIT MWK 48-20-5150
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5173 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
-
BrandMilwaukee®
-
UPC045242106103
-
Manufacturer Part Number48-20-5150
-
CountryUSA|Canada
-
MaterialCarbide
-
TypeHeavy Duty
-
Applicable MaterialsBlock, Brick and Concrete
-
Cutting Depth4-1/16 in
-
Cutting Edge MaterialCarbide
-
Shank TypeSDS Max®/Spline
-
Drill Size - Decimal Inch3.5 in
-
Drill Size - Fraction3-1/2 in
- Use with thick wall core bit shank 48-03-3564 (12 in) or 48-03-3565 (18 in)
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | PD5048205150 |
| Grainger | 1Y652 |
| MSC | 82930579 |
-
Alternative Part Number8576400
-
UNSPSC20121607
-
IDEA Index ID8576400
-
Package DescriptionEACH
-
WarrantyNo Warranty
Recently Viewed
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5173 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
Milwaukee® 48-89-9203 Step Drill Bit, 1/4 in Dia Min Hole, 3/4 in Dia Max Hole, 9 Steps, HSS, 9 Hole Sizes, 3/8 in Shank
Milwaukee® step drill bits with jam-free performance feature a dual-flute design delivering up to 2X faster hole times, up to 4X longer life and up to 50% more holes per battery charge than competitors. Ideal for drilling small and large-diameter holes in steel and plastic, these bits are optimized for cordless drills in high speed. The Rapid Strike™ tip allows for a fast and accurate start that generates less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, hole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling. The 3-flat Secure-Grip™ shank ensures a solid connection with the drill chuck. The #3 step drill bit has 9 hole sizes in 1/16 in. increments ranging from 1/4 in. to 3/4 in. jam-free performance in high speed with most professional 18 Volt cordless drills with lithium-ion battery technology.
Milwaukee® M12™ 48-20-7454 2-Cutter Single Tip Rotary Hammer Drill Bit, 3/8 in Drill Bit, SDS-Plus Shank, 10 in D Cutting, Carbide Cutting Edge, 12 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Milwaukee® 48-89-9208 Step Drill Bit, 1/2 in Dia Min Hole, 1 in Dia Max Hole, 9 Steps, HSS, 8 Hole Sizes, 3/8 in Shank
Milwaukee® step drill bits with jam-free performance feature a dual-flute design delivering up to 2X faster hole times, up to 4X longer life and up to 50% more holes per battery charge than competitors. Ideal for drilling small and large-diameter holes in steel and plastic, these bits are optimized for cordless drills in high speed. The Rapid Strike™ tip allows for a fast and accurate start that generates less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, hole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling. The 3-flat Secure-Grip™ shank ensures a solid connection with the drill chuck. The #8 step drill bit has 9 hole sizes in 1/16 in. increments ranging from 1/2 in. to 1 in.. jam-free performance in high speed with most professional 18 Volt cordless drills with lithium-ion battery technology.
Milwaukee® 48-89-9205 Step Drill Bit, 1/4 in Dia Min Hole, 1-3/8 in Dia Max Hole, 10 Steps, HSS, 10 Hole Sizes, 3/8 in Shank
Milwaukee® step drill bits with jam-free performance feature a dual-flute design delivering up to 2X faster hole times, up to 4X longer life and up to 50% more holes per battery charge than competitors. Ideal for drilling small and large-diameter holes in steel and plastic, these bits are optimized for cordless drills in high speed. The Rapid Strike™ tip allows for a fast and accurate start that generates less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, hole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling. The 3-flat Secure-Grip™ shank ensures a solid connection with the drill chuck. The #5 step drill bit has 10 hole sizes in 1/8 in. increments ranging from 1/4 in. to 1-3/8 in.. jam-free performance in high speed with most professional 18 Volt cordless drills with lithium-ion battery technology.
Milwaukee® 48-89-9209 Step Drill Bit, 7/8 in Dia Min Hole, 1-1/8 in Dia Max Hole, 2 Steps, HSS, 2 Hole Sizes, 3/8 in Shank
The MILWAUKEE® step drill bits with jam-free performance feature a dual-flute design delivering up to 2X faster hole times, up to 4X longer life and up to 50% more holes per battery charge than the competition. Ideal for drilling large and small-diameter holes in steel and plastic, these bits are optimized for cordless drills in high speed. The Rapid Strike™ tip allows for fast, accurate starts that generate less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, hole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling. The 3-flat Secure-Grip™ shank ensures a solid connection with the drill chuck. The #9 step drill bit has 2 hole sizes: 7/8" and 1-1/8". jam-free performance in high speed with most professional 18 Volt cordless drills with lithium-ion battery technology.
