MORSE® 18100 8030 General Purpose Jobber Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 118 deg Drill Point Angle, 21 Pieces, HSS, Black Oxide
MORSE® 18100 8030 General Purpose Jobber Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 118 deg Drill Point Angle, 21 Pieces, HSS, Black Oxide
-
BrandMORSE®
-
UPC686125181000
-
Manufacturer Part Number18100
-
CountryUSA
-
FinishBlack Oxide
-
MaterialHSS
-
Maximum Drill Bit Size3/8 in
-
Minimum Drill Bit Size1/16 in
-
TypeGeneral Purpose
-
Series8030
-
Number of Pieces21
-
SpecificationsStandard Flute, Standard Point, Straight Shank
-
Drill Point Angle118 deg
-
System of MeasurementImperial
-
UNSPSC27112845
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 18100 8030 General Purpose Jobber Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 118 deg Drill Point Angle, 21 Pieces, HSS, Black Oxide
MORSE® 18100 8030 General Purpose Jobber Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 118 deg Drill Point Angle, 21 Pieces, HSS, Black Oxide
3/8" BRASS GROMMET REFILL-- CARD OF 24-JWH706506 >
3/8" OVEROUND HEAD DOOR ROLLERS-NTL280149 >
Littelfuse® POWR-GARD® JLLS300 Current Limiting Fast Acting Fuse, 300 A, 600 V AC/300 V DC, 20/200 kA Interrupt, T Class, Cartridge Body
Space saving class T fuses are the most compact fuses available in ratings above 30 A less than one-third the size of comparable class R fuses. When rated in accordance with the NEC, class T fuses provide fast acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of class T fuses must be increased to prevent opening on inrush currents. In such instances, class T fuses may provide only short circuit protection.
Koyo 81206TVPB Cylindrical Bore Needle Roller Thrust Bearing
Cylindrical roller thrust bearings provide rolling bearing arrangements that accommodate high-dynamic axial loads. The simple geometry of the bearing components allows the use of many design arrangements. As an example, for less demanding applications, it is possible to combine metric series, thrust cylindrical roller and cage assemblies, including the metric series heavy thrust washers (LS, CPR) and even the metric series thin thrust washers (AS, CP). These two thrust washer types are more commonly used with thrust needle roller and cage assemblies. Thrust cylindrical roller and cage assemblies also can be used without bearing thrust washers if the adjacent machine components can be prepared to serve as suitable raceways. Cylindrical roller thrust bearings may be used where the load carrying capability of thrust needle roller and cage assemblies is insufficient. Also, the bearings can accommodate high-dynamic and static axial loads in one direction, but they are not suitable to transmit radial loads.
MORSE® 11458 1332 General Purpose Jobber Length Drill Bit, K Drill - Letter, 0.281 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 11458 1332 General Purpose Jobber Length Drill Bit, K Drill - Letter, 0.281 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
