Drillco 200LH21 Left Hand Cut Jobber Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 118 deg Drill Point Angle, 21 Pieces, HSS, Uncoated
200LH drills are used in close center multiple spindle gear driven drilling heads, where adjacent spindles operate alternately left and right hand. They are also used in left hand screw machines. Can be used to drill out broken bolts.
-
BrandDrillco
-
UPC045997491011
-
Manufacturer Part Number200LH21
-
CountryUSA|Canada
-
FinishUncoated
-
MaterialHSS
-
Maximum Drill Bit Size3/8 in
-
Minimum Drill Bit Size1/16 in
-
TypeLeft Hand Cut
-
Series200LH
-
Number of Pieces21
-
SpecificationsStraight Shank
-
Drill Point Angle118 deg
-
System of MeasurementImperial
- Left handed flutes and cutting edges allow for counter-clockwise drilling
- 118 conventional point for rapid penetration
- Jobber length for most use cases
-
UNSPSC27112845
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
Drillco 200LH21 Left Hand Cut Jobber Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 118 deg Drill Point Angle, 21 Pieces, HSS, Uncoated
200LH drills are used in close center multiple spindle gear driven drilling heads, where adjacent spindles operate alternately left and right hand. They are also used in left hand screw machines. Can be used to drill out broken bolts.
Makita® HP2010N Hammer Drill, 1/2 in Keyless Chuck, 120 V AC, 13-3/4 in OAL
Makita® HP2010N Hammer Drill, 1/2 in Keyless Chuck, 120 VAC, 13-3/4 in OAL
Mayhew™ 41280 Die Separating Bar, 18 in OAL, Hardened Tempered Steel
Mayhew™ 41280 Die Separating Bar, 18 in OAL, Hardened Tempered Steel
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
MORSE® 11384 1340 General Purpose Jobber Length Drill Bit, #51 Drill - Wire, 0.067 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 11384 1340 General Purpose Jobber Length Drill Bit, #51 Drill - Wire, 0.067 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Koyo 1313K Caged Medium Tapered Bore Self-Aligning Ball Bearing, 65 mm Dia Bore, 140 mm OD, 2 Rows, 33 mm W, 61.7 kN Dynamic/22.9 kN Static Load
Self-aligning ball bearings have a spherical outer ring raceway, the center of whose curvature meets that of the bearing itself, so that the inner ring, balls and cage continue to rotate, aligning themselves if they have become misaligned within design limits.
