Milwaukee® 48-03-3555 Core Bit Adapter, SDS-Plus Adapter Shank, For Use With 86795 1-3/4 to 4 in Thinwall Core Bit, 8 in OAL
8 in. SDS Plus adapter for 1-3/4 in. to 4 in. thin wall core bits. Includes shank only.
-
BrandMilwaukee®
-
UPC045242086795
-
Manufacturer Part Number48-03-3555
-
CountryUSA|Canada
-
MaterialHardened Carbon Steel
-
Adapter Shank TypeSDS-Plus
-
Dimensions2-13/16 in D
-
Overall Length8 in
-
Suitable For Use With86795 1-3/4 to 4 in Thinwall Core Bit
- Extends reach - Drill in tight and hard-to-reach spaces
-
Alternative Part Number8572243
-
UNSPSC20121613
-
IDEA Index ID8572243
-
Package DescriptionEACH
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 48-03-3555 Core Bit Adapter, SDS-Plus Adapter Shank, For Use With 86795 1-3/4 to 4 in Thinwall Core Bit, 8 in OAL
8 in. SDS Plus adapter for 1-3/4 in. to 4 in. thin wall core bits. Includes shank only.
Greenlee® Slug-Buster SC® 124AV Round Replacement Conduit Die, Round Punch, 3/4 in Conduit/Pipe, Mild Steel, 10 ga
Greenlee® Slug-Buster SC® 124AV Round Replacement Conduit Die, Round Punch, 3/4 in Conduit/Pipe, Mild Steel, 10 ga
BALL BEARINGS-NAC6013ZZE>
Milwaukee® 48-20-5030 Heavy Duty Thin Wall Core Bit, 1-3/4 in Drill - Fraction, 1.75 in Drill - Decimal Inch, Carbide
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
60-GRIT SANDING PAPER-BSHRS060>
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
