MORSE® 25558 1751 Machine Countersink, 7/8 in Dia Body, 1/2 in Dia Shank, 4 Flutes, 82 deg Included, HSS
MORSE® 25558 1751 Machine Countersink, 7/8 in Dia Body, 1/2 in Dia Shank, 4 Flutes, 82 deg Included, HSS
-
BrandMORSE®
-
UPC686125255589
-
Manufacturer Part Number25558
-
CountryUSA
-
FinishBlack Oxide
-
MaterialHSS
-
Series1751
-
Shank Diameter1/2 in
-
Number of Flutes4
-
Included Angle82 deg
-
Body Diameter7/8 in
-
Overall Length4-1/4 in
- The longer shank length is ideal for use in turret lathes for screw machine work
- Four flutes allow higher feed rates than single flute countersinks and greater chip clearance than six flute countersinks
- Black oxide increases wear resistance, reduces galling and chip welding, improves chip flow and increases lubricant retention
-
UNSPSC27112812
-
Package Description1/PK
-
Standards/ApprovalsNSF Listed
-
Catalog
Recently Viewed
MORSE® 25558 1751 Machine Countersink, 7/8 in Dia Body, 1/2 in Dia Shank, 4 Flutes, 82 deg Included, HSS
MORSE® 25558 1751 Machine Countersink, 7/8 in Dia Body, 1/2 in Dia Shank, 4 Flutes, 82 deg Included, HSS
ITM 715S61664 Rotary Hammer Drill Bit, 1/4 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
ITM 715S61664 Rotary Hammer Drill Bit, 1/4 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
8-MM X 9" LOOP T-HANDLE HEX KEYS - ALL58286 >
5/16" T-HANDLED HEX KEY - ALL56060>
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
MORSE® 25554 1751 Machine Countersink, 5/8 in Dia Body, 1/2 in Dia Shank, 4 Flutes, 82 deg Included, HSS
MORSE® 25554 1751 Machine Countersink, 5/8 in Dia Body, 1/2 in Dia Shank, 4 Flutes, 82 deg Included, HSS
