Liquid Tight Flexible Metal Conduit(LFMC)
With a wide range of sizes and styles, Madison has the flex and liquidtight conduit that you need. From trade sizes ranging from 3/8 to 4 in, no job is too big or too small. Made from the highest quality steel, aluminum and PVC, Madison's flex and liquidtight conduit come through each and every time.
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
Titan2â„¢ 55093801 Type EF General Purpose Liquid Tight Flexible Metal Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.844 in OD, 100 ft Coil L, Steel
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
Ultratite Liquidtight Flexible Metal Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. Also used in industrial and commercial applications for conveyors, blowers, cranes, air conditioners, machine tooling and lubrication equipment. It can be used in conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. Applications requiring movement, crossover connections, or tight bends.
Ultratite Liquidtight Flexible Metal Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. Also used in industrial and commercial applications for conveyors, blowers, cranes, air conditioners, machine tooling and lubrication equipment. It can be used in conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. Applications requiring movement, crossover connections, or tight bends.
Recently Viewed
Browning® 1111962 A Plate Sprocket, 60 Chain, 35 Teeth, For Use With T55L Torque Limiters, 8.78 in OD
Remke Tuff-Sealâ„¢ 7303-008R Closed Mesh Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.22 to 0.32 in Cable, For Use With 1/2 in NPT Connector, Aluminum
Tuff-Sealâ„¢ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Browning® 1111921 A Plate Sprocket, 60 Chain, 22 Teeth, For Use With T45L Torque Limiters, 5.67 in OD
Littelfuse® POWR-GARD® LFR60200-1C Fuse Block, 600 V AC, 200 A, Class: R, 6 AWG to 250 kcmil Wire, 1 Poles
The new Littelfuse® class H and R blocks offer many advantages over previous generations that are noted in the features and benefits section. Class H and class R fuse blocks are dimensionally the same, but class R blocks incorporate A rejection feature, which only allows class R fuses to be inserted.
HCI Preferred Supplier 200-AAL A1 6191X Cam and Groove Adapter, 2 in Nominal, Male Adapter x FNPT End Style, Aluminum
HCI Preferred Supplier CGA-200-A1 6191X Cam and Groove Adapter, 2 in Nominal, Male Adapter x FNPT End Style, Aluminum
BBI 087276 Partially Threaded Cap Screw, 7/16-20, 3-3/4 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
BBI 087276 Partially Threaded Cap Screw, 7/16-20, 3-3/4 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
