Gardner Bender FLX-3810T Split Flex Tubing, 3/8 in Trade, 10.7 mm Dia Inside x 14.1 mm Dia Outside, 10 ft L, Polyethylene
Organize and protect electrical hoses, wires and cables from cuts, abrasions and UV damage with Gardner Bender flexible tubing.
-
BrandGardner Bender
-
UPC032076912345
-
Manufacturer Part NumberFLX-3810T
-
CountryUSA
-
Temperature Rating-67 to 275 deg F
-
Thickness0.27 mm
-
MaterialPolyethylene
-
Trade Size3/8 in
-
ColorBlack
-
Inside Diameter10.7 mm
-
Outside Diameter14.1 mm
-
Length10 ft
- Excellent for managing cords for electronics, under hood or trailer wiring
- Corrugated for added flexibility
- Split down the middle for wire breakout where needed
- Quickly and easily wraps around wire
- Tube can be cut to shorter lengths as needed
- Black flex tubing
-
UNSPSC39131706
-
Standards/ApprovalsRoHS Compliant
-
Specification Sheet
Recently Viewed
Gardner Bender FLX-3810T Split Flex Tubing, 3/8 in Trade, 10.7 mm Dia Inside x 14.1 mm Dia Outside, 10 ft L, Polyethylene
Organize and protect electrical hoses, wires and cables from cuts, abrasions and UV damage with Gardner Bender flexible tubing.
United Abrasives-SAIT 24090 Type 1 Burr Free Stationary Saw Cut-Off Wheel, 20 in Dia x 3/16 in THK, 1 in Center Hole, A24R Grit, Aluminum Oxide Abrasive
ILSCO® ClearChoice® 23210-B2 Heavy Wall Flame Retardant Shrink-On Tubing Cap, 600 V AC, 2.05 in ID Expanded, 3/4 in ID Recovered, 3:1 Shrink Ratio
ILSCO® ClearChoice® 23210-B2 Heavy Wall Flame Retardant Shrink-On Tubing Cap, 600 VAC, 2.05 in ID Expanded, 3/4 in ID Recovered, 3:1 Shrink Ratio
ILSCO® ClearChoice® SLU-125 1-Conductor Compact Mechanical Lug, 6 to 1/0 AWG Copper Conductor, 1/4 in Stud, 1 Bolt Holes, Copper
ILSCO® ClearChoice® SLU-125 1-Conductor Compact Mechanical Lug, 6 to 1/0 AWG Copper Conductor, 1/4 in Stud, 1 Bolt Holes, Copper
Dichtomatik 75102054 O-Ring, 110 Dash Number, 0.362 in ID x 0.568 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik 75102004 O-Ring, 009 Dash Number, 0.208 in ID x 0.348 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
