Browning® 1111996 Sprocket, 60 Chain, 35 Teeth, For Use With T65L Torque Limiters, 8.78 in OD
Browning® 1111996 Sprocket, 60 Chain, 35 Teeth, For Use With T65L Torque Limiters, 8.78 in OD
-
BrandBrowning®
-
UPC662289152315
-
Manufacturer Part Number1111996
-
CountryUSA
-
Pitch Diameter8.367 in
-
Thickness5/16 to 1 in
-
Chain Number60
-
Number of Teeth35
-
Outside Diameter8.78 in
-
Suitable For Use WithT65L Torque Limiters
- Morse and Browning offer a complete line of Torque Overload Devices to protect machinery from overloads or jams
- Stock sprockets supplied with ground faces to fit the Browning torque limiter
- Torq/ Gard accessory bushing kit
-
Alternative Part Number60T65L35
-
UNSPSC31171901
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
Recently Viewed
Browning® 1111996 Sprocket, 60 Chain, 35 Teeth, For Use With T65L Torque Limiters, 8.78 in OD
Browning® 1111996 Sprocket, 60 Chain, 35 Teeth, For Use With T65L Torque Limiters, 8.78 in OD
1-1/4" SCHEDULE 80 SEAMLESS BLACK PIPE. SOLD BY THE FOOT-FIT11/4XHSMLSCC >
Ingersoll Rand 105-D2 105 Series Mini Wrench, 1/4 in Drive, 25 ft/lb Torque Rating, 250 rpm Speed, 18 cfm Air Flow
The 105 Series of air ratchet wrenches are small, durable, and easy to handle for vehicle repair technicians. The low profile forward/reverse control has a wide diameter for easy gripping and increased control in confined spaces.
3" METAL BLACK PIPE SOLD BY THE FOOT-JWH3BTC >
Browning® 3546991 TGC Cam Detent Mini Straight Bushing Overload Clutch, 1/2 in Dia Bore, 3.15 in OD, 23 to 56 in-lb Torque, 2.36 in OAL
The Browning® Torq/Gard® overload clutches are one of the most popular torque overload devices that power transmission solutions offers. A spring loaded cam follower seated in a single hub cam detent cause the hub and clutch to rotate together. Therefore, the clutch always resets in the same position if tripped, staying in phase. They can be turned in both directions by design. After tripping, the unit automatically resets when it returns to the set position. This is usually performed by jogging the machine after the jam or overload is cleared. Shaft bushings are used to accommodate a standard maximum bore unit to the application shaft requirement. Torque capacity up to 8000 in-lb and speed ranges from 350 to 1800 rpm.
1-1/2" SCH-80 SEAMLESS PIPE (FT)-JPW11/2XHSMLS >
