Browning® 1112036 A Plate Sprocket, 80 Chain, 40 Teeth, For Use With T65L Torque Limiters, 13.31 in OD
Browning® 1112036 A Plate Sprocket, 80 Chain, 40 Teeth, For Use With T65L Torque Limiters, 13.31 in OD
-
BrandBrowning®
-
UPC662289192328
-
Manufacturer Part Number1112036
-
CountryUSA
-
Pitch Diameter12.746 in
-
Thickness0.575 in
-
Chain Number80
-
TypeA Plate
-
Number of Teeth40
-
Outside Diameter13.31 in
-
Suitable For Use WithT65L Torque Limiters
- Morse and Browning offer a complete line of Torque Overload Devices to protect machinery from overloads or jams
- Stock sprockets supplied with ground faces to fit the Browning torque limiter
-
Alternative Part Number80T65L40
-
UNSPSC31171901
-
Package DescriptionEACH
-
Warranty1 Year
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Browning® 1112036 A Plate Sprocket, 80 Chain, 40 Teeth, For Use With T65L Torque Limiters, 13.31 in OD
Browning® 1112036 A Plate Sprocket, 80 Chain, 40 Teeth, For Use With T65L Torque Limiters, 13.31 in OD
RUS-KIL SAFETY RED SPRAY PAINT-BLP1072S >
Browning® 1296532 T55L Automatic Torque Limiter, 1-7/16 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
3/16" ID 5/16"OD POLY TUBE--ROLL OF 300'-JWH453609>
Crown® by Aervoe® 7007G Cold Galvanizing Compound, 1 gal Container, Bulk Liquid Form, Light Gray, 48 sq-ft/can Coverage, 24 hr Curing
Crown's premium Cold Galvanize Coating 93% zinc Rich provides corrosion protection to ferrous metal surfaces; first as a long lived coating of practically pure zinc comparable to that obtained by galvanization and second, through sacrificial anodization. Both aerosol and bulk use metallic zinc dust that is 97% pure, which leaves 93% zinc in the dry film. The zinc fuses to metal substrates for protection equal to or better than hot-dipped galvanizing. This protection becomes effective when the surface is scratched, broken, or corrupted. With the presence of moisture the zinc coating will corrode while continuing to protect the metal it covers.
RUS-KIL SAFETY BLUE SPRAY PAINT-BLP1037S >
