Torque Limiter Springs
Morse® 100523 Torque Limiter Disk Spring, For Use With 500A-1/500A-2 Torque Limiter
Morse® 100513 Torque Limiter Disk Spring, For Use With 350A-1/350A-2 Torque Limiter
Morse® 100503 Torque Limiter Disk Spring, For Use With 250A-1/250A-2 Torque Limiter
Browning® 1304880 Replacement Spring, For Use With T45L Torque Limiter
Recently Viewed
2" X 1" X 1/4" 40-GRIT FLAPWHEEL-ARC11642 >
MCR Safety 103 Takeup Faceshield Headgear With Adjustable Headband, Blue, Polycarbonate, Ratchet Adjustment
MCR Safety's headgear and face shields offer superior protection from liquid splashes and flying debris that would otherwise be damaging to the face. An assortment of brackets, face shield sizes, and materials make it a good bet that you can find an option suitable for you. The 103 headgear is lightweight and adjustable. Ratcheting action allows an attached face shield to be raised and lowered. (Headgear only, face shields sold separately) . This product meets the ANSI/ISEA Z87.1-2025 standard.
4-1/2" PADDLE-STYLE ANGLE GRINDERS-MTBWP780>
>
IDEAL® Yellow 77® 31-351 Wire Pulling Lubricant, 1 gal Bucket, Paste Form, Yellow, 0.98
IDEAL Yellow 77 Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77 has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature of 32°F to 130°F (0°C to 54°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed.
ITM 715S61664 Rotary Hammer Drill Bit, 1/4 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
ITM 715S61664 Rotary Hammer Drill Bit, 1/4 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
