Morse® 604106 Bushing
Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.
-
BrandMorse®
-
UPC662288494935
-
Manufacturer Part Number604106
-
CountryUSA
-
MaterialSintered Steel
-
Dimensions0.48 in L
-
Suitable For Use With350A Series Plain Bore Torque Limiter
- Morse and Browning offer a complete line of Torque Overload Devices to protect machinery from overloads or jams
- Bushing kits are available in a wide range of bore size and are easily installed
- The load on the friction pads is adjusted so that process torque is transmitted
- An overload causes the unit to slip
- Morse torque limiters are simple design, economical, easy adjustment, compact and dependable
-
Alternative Part Number350 TL BUSHING (480)PB
-
UNSPSC40161515
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.
3/4" X 2-1/2" HD OVAL DIE SPRINGS-LANSHDO750250 >
HYDRAULIC HOSE ENDS HY-1616-FJ45T 108586-DAY16RJ416SB >
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Dichtomatik N70366 O-Ring, 366 Dash Number, 7.225 in ID x 7.645 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
MORSE® 14187 1363 General Purpose Jobber Length Drill Bit, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
