Wilton® WL9-63186 Verti-Lock Machine Vise, 19-45/64 in L 6-5/7 in H, 7-1/2 in Jaw Opening, 6700 lb Capacity, Ductile Alloy
Wilton's verti-lock machine vise has a ductile alloy body with flame hardened bed to provide solid work support, accuracy and longevity. The spindle fully enclosed to protect it from milling elements and cut from special ally steel, hardened and ground.
-
BrandWilton®
-
UPC019907631866
-
Manufacturer Part NumberWL9-63186
-
CountryUSA
-
Capacity6700 lb
-
MaterialDuctile Alloy
-
Throat Depth2 in
-
TypeVerti-Lock
-
Base TypeStationary
-
Jaw Opening7-1/2 in
-
Jaw Width6 in
-
Overall Height6-5/7 in
-
Overall Length19-45/64 in
- The ductile alloy vise body with flame hardened bed provides solid work support, accuracy and longevity
- The fixed jaw is rated at 85000 psi and the annealed, surface ground sliding jaw at 70000 psi
- Totally enclosed vise screw is cut from special alloy steel, hardened and ground
- The vise and optional swivel base have coolant troughs to channel fluid out of your way
- Horizontal vises slide from side to side during milling operations
- Stationary vises are used for machining straight surfaces. they can be fastened to the machine at either a parallel or at a right angle
- 1-3/4 in jaw depth
- Manual operation
- Horizontal orientation
-
Alternative Part Number63186
-
UNSPSC27112102
-
WarrantyLifetime
-
Catalog
Recently Viewed
Wilton® WL9-63186 Verti-Lock Machine Vise, 19-45/64 in L 6-5/7 in H, 7-1/2 in Jaw Opening, 6700 lb Capacity, Ductile Alloy
Wilton's verti-lock machine vise has a ductile alloy body with flame hardened bed to provide solid work support, accuracy and longevity. The spindle fully enclosed to protect it from milling elements and cut from special ally steel, hardened and ground.
60516 Oxy-acetylene Cutting Tip, Size #4 Medium Duty Puroxcompatible.
OXY-ACETYLENE CUTTING TIP, SIZE #4 MEDIUM DUTY PUROXCOMPATIBLE.-FOR60516 >
DOUBLE SHIELDED BALL BEARINGS-GEN2140688>
MORSE® 43503 1897 Non-Center Cutting Regular Length Single End End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-7/16 in OAL, Bright
MORSE® 43503 1897 Non-Center Cutting Regular Length Single End End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-7/16 in OAL, Bright
Hougen® 12118 12000 Annular Cutter, 9/16 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Gates® Power Transmission 4430V772 Bandless Multi-Speed V-Belt, 2-3/4 in W Top, 30 deg Groove, 78.6 in L Outside, Rubber
Power transmission systems do more than operate at constant speeds with constant outputs. Customers increasingly need variable speed systems to regulate the speed and rotational force, or output torque, of critical mechanical equipment. Our Multi-Speed belts are engineered for efficiency, energy savings and increased productivity at a wide range of speeds and speed ratios.
