Wilton® WL9-13403 Cam Action Drill Press Vise, 21.1 in L 7.2 in H, 8-3/16 in Jaw Opening, 600 to 1200 lb Capacity, Cast Iron
With the Wilton Cam Action Drill Press, a simple push or pull on the center bar knob sets the jaw in position
-
BrandWilton®
-
UPC019907134039
-
Manufacturer Part NumberWL9-13403
-
CountryUSA
-
Capacity600 to 1200 lb
-
MaterialCast Iron
-
Throat Depth2 in
-
TypeCam Action
-
Base TypeStationary
-
Jaw Opening8-3/16 in
-
Jaw Width8 in
-
Overall Height7.2 in
-
Overall Length21.1 in
- Simple push or pull on the center bar knob sets the jaw in position
- Easy press locking lever cams the jaw ahead 3/32 in, exerting a holding pressure that is adjustable from 400 to 1100 lb
- Base is designed for clear through drilling applications
- Unique top locking lever can be raised or lowered to tighten or loosen against the work piece
- Drill press vises with a horizontal orientation are ground on the base only, for horizontal work holding
- Stationary or fixed vises are used for machining straight surfaces. they can be fastened to the machine at either a parallel or at a right angle
- Standard spindle operations feature a continuous nut design for consistent jaw movement
- Cast iron is a heavy material that is malleable and extremely strong
- 12.50 in width
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 24W073 |
| Grainger | 24W073 |
-
Alternative Part Number13403
-
UNSPSC27112157
-
WarrantyLifetime
-
Catalog
Recently Viewed
Wilton® WL9-13403 Cam Action Drill Press Vise, 21.1 in L 7.2 in H, 8-3/16 in Jaw Opening, 600 to 1200 lb Capacity, Cast Iron
With the Wilton Cam Action Drill Press, a simple push or pull on the center bar knob sets the jaw in position
60" RED F/G SQUEEGEE HANDLE-LAG29384 >
NIBCO 62-108-01 In-Line Check Valve, 2 in Nominal, FNPT End Style, 81 gpm Flow Rate, Stainless Steel Body, Domestic
The 62-100 Series is uniquely suited for applications in corrosive environments, including chemical processing, pulp and paper and other process industries. The rugged stainless steel body and RPTFE ball check provide reliable, patented protection against reverse flow.
2.4-VOLT 2-SP CORDLESS SCREWDRIVER-MWK65466 >
Eklind® 15638 Hex-L® Hex Key, Hex Drive, L-Handle Handle, ANSI B18.3, Alloy Steel, Black Oxide
Eklind® 15638 Hex-L® Hex Key, Hex Drive, L-Handle Handle, ANSI B18.3, Alloy Steel, Black Oxide
McGill® 0000830000 MI Series Narrow Machined Separable Inner Ring With Oil Hole and Annular Groove, 1/2 in ID x 0.7493 in OD, 0.76 in OAW, For Use With GUIDEROL® GR 12 N, CAGEROL® MR 12 N Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
