Firestop / Duct Seal
Gardner Bender DS-110N Duct Seal Compound, 1 lb Pug, Solid Form, Dark Gray, 1.78
Gardner Bender DS-110N Duct Seal Compound, 1 lb Pug, Solid Form, Dark Gray, 1.78
Metacaulk® 66640 Intumescent Firestop Sealant, 10.3 oz Cartridge, Paste Form, Red, 1.25
Metacaulk® 1000 is a one component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations. Metacaulk® 1000 is a water based, extremely intumescent, non-sag caulking grade sealant that is easy to apply as well as to retrofit. It cures to an elastomeric seal that is suitable where dynamic movement is expected. In the event of a fire, Metacaulk® 1000 will prevent the spread of flames, smoke, hot gases and water through joint openings and through penetrations. No dilution or mixing is required for use. No special skills are necessary for installation. Metacaulk® 1000 is applied with a conventional caulking gun, bulk loading gun or can be troweled from the pail. For large applications, it can be pumped directly from the pail. Metacaulk® 1000 systems are rated for 1, 2, 3 and 4 hours in accordance with the ASTM E814 (UL1479),UL 2079 and ULC-S115-95 test standards. Metacaulk® 1000 is protected in a wet stage as well as in a dry stage against mold growth with a combination of biocides.
Recently Viewed
Apex® 492-B-ACR2-DX Power Drive Bits, #2 Phillips® Point, 3-1/2 in OAL
1-1/4" EMT COMPRESSION COUPLING-APLTC614>
Schneider Electric Harmony 9001KS49B Type T-K Dust/Oil/Watertight Heavy Duty Round Waterproof Non-Illuminated Selector Switch Operator, 30 mm, Knob Operator, 3 Positions, Black
This Harmony 9001K, metal selector switch head, with a black standard handle, has 3 positions and operates with a stay-put mechanism. It has a chromium-plated metal bezel. It is easily installed into standard 30mm diameter panel cut-outs and connected to control circuits with classic screw-clamp connections. It features a dust and oil-resistant weatherproof enclosure for indoor and outdoor use. It is impact-resistant, dust-resistant, water-resistant, and vibration-resistant thanks to its NEMA 1/2/3/3R/4/6/12/13 ratings. A dedicated contact block and handle need to be purchased separately. Harmony 9001K is a range of heavy-duty chromium-plated metal pushbuttons, selector switches, pilot lights, and specialty operators.
Square D™ 8536SBO2V06 Type S Starter, 440/480 VAC V Coil, Non-Reversing Action, 3 Poles, Open Enclosure
Type S NEMA motor starters are used for full voltage starting and stopping of AC squirrel cage motors. Type S motor starters have ratings up to 810 amperes. This 3 pole NEMA Size 0 non-reversing starter has an 18 ampere rating. NEMA Size 0 motor starters have 3 phase ratings of 3 HP at 200 and 230 VAC and 5 HP at 460 and 575 VAC. This non-reversing NEMA motor starter has a melting alloy type overload relay that uses Type B thermal units to sense over current conditions. This NEMA starter has a 5 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 440/480 VAC 50/60 Hz operating coil wired for common control. This NEMA starter is an open device without an enclosure. This starter is 6.77 inches tall, 4.52 inches wide and 4.22 inches deep. A wide variety of accessories are available for Type S starters. Type S non-reversing NEMA motor starters are UL listed and CSA certified.
4" EMT CONDUIT SET SCREW COUPLINGS-APLTC520>
Schneider Electric Harmony™ 9001K70H7 Type T-K Operator Joystick Controller With Latch, 30 mm, 2NO Contact
Schneider Electric Harmony™ 9001K70H7 Type T-K Operator Joystick Controller With Latch, 30 mm, 2NO Contact
