LPS Chemical 1-GAL ZERO-TRI CLEANER/DEGREASER LPS 03528
The fast-acting alternative to chlorinated solvents for degreasing parts and equipment
-
BrandLPS®
-
UPC078827035284
-
Manufacturer Part Number03528
-
CountryUSA|Canada
-
FormLiquid
-
ColorClear
-
TypeHeavy Duty
-
CompositionAcetone, Heptane, Cyclohexylmethane, Primary Amyl Acetate
-
VOC Content0.63
-
Container Size1 gal
-
Container TypeCan
-
SeriesZeroTri®
-
Specific Gravity1.5
-
Odor/ScentEther/Fruity
- Inverted spray valve
- Fast-acting solvent for degreasing parts and equipment, penetrating action instantly, no rinsing and no residuesafe to use on most surfaces
- 1.4 deg F flash point
- Ready to use dilution
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 49CT13 |
-
UNSPSC47131821
-
Standards/ApprovalsNSF® Certified C1 059845 Registration
Recently Viewed
The fast-acting alternative to chlorinated solvents for degreasing parts and equipment
Anvil® 0310086806 FIG 1125 Auxiliary Air Regulator Reducer, Coupling, 1 x 3/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
The fast-acting alternative to chlorinated solvents for degreasing parts and equipment
Dykem® STEEL BLUE® 80300 Layout Fluid, 4 oz Bottle, Sweet/Solvent, Liquid, Steel Blue
Anvil® 0318904083 Square Head Countersunk Pipe Plug, 3/8 in Nominal, MNPT End Style, 300 lb, Merchant Steel, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI. (6.9 bar).
