Gunk® MotorMedic® M4412 Dot 3 Super Heavy Duty Brake Fluid, 12 oz Plastic Bottle, Liquid, Light Yellow to Amber, Mild
Gunk® MotorMedic® M4412 Dot 3 Super Heavy Duty Brake Fluid, 12 oz Plastic Bottle, Liquid, Light Yellow to Amber, Mild
-
BrandGunk®
-
UPC078698134413
-
Manufacturer Part NumberM4412
-
CountryUSA
-
FormLiquid
-
Freezing Point-90.58 deg F
-
ColorLight Yellow to Amber
-
TypeDot 3 Super Heavy Duty
-
Composition2-(2-Butoxyethoxy) Ethanol, Diethyleneglycol, Polyethyleneglycol, Diethylene Glycol Methylester, Diethylenglykolmonoethylether
-
VOC Content0.2319
-
Container Size12 oz
-
Container TypePlastic Bottle
-
pH Range10 to 11.5
-
Specific Gravity1 to 1.07
-
Odor/ScentMild
-
Boiling Point446.72 deg F
- >275 deg F Flash point
-
UNSPSC15121509
-
Standards/ApprovalsS.A.E. Specs. J1703|Fed. Spec. VVb680|Fed. Safety Std No. 116
-
SDS
-
Specification Sheet
-
Catalog
Recently Viewed
Gunk® MotorMedic® M4412 Dot 3 Super Heavy Duty Brake Fluid, 12 oz Plastic Bottle, Liquid, Light Yellow to Amber, Mild
Gunk® MotorMedic® M4412 Dot 3 Super Heavy Duty Brake Fluid, 12 oz Plastic Bottle, Liquid, Light Yellow to Amber, Mild
LubriMatic® 75-070 All Purpose Funnel, 2 qt Capacity, 7 in Dia, 9 in H
Nice® 5491VMF53 5000® Round Bore Unground Flanged Radial Ball Bearing, 1/2 in Dia Bore, 1-1/8 in OD, 1 Row, 0.437 in W, 200 lb Load
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
Alemite® 1641-B Straight Thread Fitting, 1/4-28 Taper Thread, 35/64 in OAL, 3/16 in L Shank, Trivalent Zinc Plated
Alemite® 1641-B Straight Thread Fitting, 1/4-28 Taper Thread, 35/64 in OAL, 3/16 in L Shank, Trivalent Zinc Plated
Leviton® L7504 Straight Single Weave Wide Range Wire Mesh Strain Relief Grip, 3/4 in Trade, 0.52 to 0.73 in Cable Openings, Steel, Galvanized
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
1687/1587 23-A-90-2 #2 OXY-ACETYLENE WELDING TIP - FOR87202>
