Dodge® 117233 Stock Bore Taper Lock Bushing, 3-3/8 in Dia Bore, 5 in Dia Barrel, 3-1/2 in OAL, Iron
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475092987
-
Manufacturer Part Number117233
-
CountryUSA
-
Taper8 deg
-
MaterialIron
-
Torque Rating44800 in-lb
-
TypeStock Bore
-
Screw Size1/2 x 1-1/2 in
-
Number of Bolt Holes3
-
Hub Diameter7 in
-
Barrel Diameter5 in
-
Keyway Size7/8 x 1/4 in
-
Bolt Circle Diameter4.83 in
-
Bore Diameter3-3/8 in
-
Overall Length3-1/2 in
- Size 3535 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number3535 X 3-3/8-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Warranty Information
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Dodge® 117233 Stock Bore Taper Lock Bushing, 3-3/8 in Dia Bore, 5 in Dia Barrel, 3-1/2 in OAL, Iron
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Rust-Oleum® 266041 ROC-Prime 100 Water Based Hybrid Epoxy Primer, 5 gal Container, Liquid Form, Gray, 225 to 375 sq-ft/gal Coverage
MORSE® 44469 4593 Center Cutting Regular Length Single End Roughing End Mill, 1-1/4 in Dia Cutter, 2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 4-1/2 in OAL, Bright
MORSE® 44469 4593 Center Cutting Regular Length Single End Roughing End Mill, 1-1/4 in Dia Cutter, 2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 4-1/2 in OAL, Bright
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
ASP-137-2-S Industry Standard Clamping Collar, 2-Piece Construction, 1-3/8 in ID x 2-1/4 in OD x 9/16 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-212-2-S Industry Standard Clamping Collar, 2-Piece Construction, 2-1/8 in ID x 3-1/4 in OD x 3/4 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
