Dodge® 117438 Stock Bore Taper Lock Bushing, 3-15/16 in Dia Bore, 6.38 in Dia Barrel, 4-1/2 in OAL, Iron
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475093663
-
Manufacturer Part Number117438
-
CountryUSA
-
Taper8 deg
-
MaterialIron
-
Torque Rating110000 in-lb
-
TypeStock Bore
-
Screw Size3/4 x 2 in
-
Number of Bolt Holes3
-
Hub Diameter9-1/2 in
-
Barrel Diameter6.38 in
-
Keyway Size1 x 1/2 in
-
Bolt Circle Diameter6.13 in
-
Bore Diameter3-15/16 in
-
Overall Length4-1/2 in
- Size 4545 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number4545 X 3-15/16-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
-
Warranty Information
Recently Viewed
Dodge® 117438 Stock Bore Taper Lock Bushing, 3-15/16 in Dia Bore, 6.38 in Dia Barrel, 4-1/2 in OAL, Iron
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
CURVED WOOD-HANDLE BRASS WIRE SCRATCH BRUSH - MAG1SB >
ASP-193-2-S Industry Standard Clamping Collar, 2-Piece Construction, 1-15/16 in ID x 3 in OD x 11/16 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
GP® 1012R Standard Length Socket, 3/8 in Drive, 3/8 in Socket, 6 Points
Dichtomatik S70011 O-Ring, 011 Dash Number, 0.301 in ID x 0.441 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Southwire® SIMpull THHN® 11596457 Type THHN/THWN/AWM Building Wire, Spool Packaging, 600 V, (1) 10 AWG Solid Copper Conductor, 500 ft L, White
THHN copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600 volts.
