Browning® 3750544 Taper Lock Bushing, 2 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
Browning® 3750544 Taper Lock Bushing, 2 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
-
BrandBrowning®
-
UPC662289621941
-
Manufacturer Part Number3750544
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating24000 in-lb
-
Screw Size5/8 x 1-1/4 in
-
Number of Bolt Holes2
-
Barrel Diameter4-1/4 in
-
Keyway Size1/2 x 1/4 in
-
Bolt Circle Diameter4 in
-
Bore Diameter2 in
-
Overall Length3 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
- Mounts flush in products - No protruding flanges to interfere with the drive
-
Alternative Part Number3030X2
-
UNSPSC31163205
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Browning® 3750544 Taper Lock Bushing, 2 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
Browning® 3750544 Taper Lock Bushing, 2 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
MORSE® 43188 1890 Ball Nose Center Cutting Regular Length End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
60 TOOTH SPROCKETS FOR #35 CHAIN-IDC35B60F1 >
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
OIL SEALS-1.594" X 2.502" X .313"-IMS15960>
GENERAL PURPOSE PAINT BRUSH FEATURES A SOLID WOOD HANDLE, BRASS FERRULE, WOOD PLUS AND POLYESTER FILAMENT WITH CHISELED TRIM. QUALITY FINISH WITH ALL TYPES OF PAINTS AND FINISHES.
-JWH780444 >
