Browning® 3750361 Taper Lock Bushing, 2-7/8 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
Browning® 3750361 Taper Lock Bushing, 2-7/8 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
-
BrandBrowning®
-
UPC662289617692
-
Manufacturer Part Number3750361
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating24000 in-lb
-
Screw Size5/8 x 1-1/4 in
-
Number of Bolt Holes2
-
Barrel Diameter4-1/4 in
-
Keyway Size5/8 x 5/16 in
-
Bolt Circle Diameter4 in
-
Bore Diameter2-7/8 in
-
Overall Length2 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
- Size 3020 bushing
- Key to key drive cap screws act as an external key
- 1-1/2 in/ft taper on barrel since this is a non-self locking taper it provides ease of installation and removal of products from the shaft
-
Alternative Part Number3020X 2 7/8
-
UNSPSC31163205
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Browning® 3750361 Taper Lock Bushing, 2-7/8 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
Browning® 3750361 Taper Lock Bushing, 2-7/8 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
Gates® Power Transmission Poly Chain® GT®2 14MX-33S-37 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5.68 in OD, 33 Grooves, 5.79 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission Poly Chain® GT®2 14MX-40S-37 Synchronous Sprocket, 7/8 to 3-1/4 in Taper-Lock® Bore, 6.91 in OD, 40 Grooves, 7.018 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
2" X 120" 1-PLY FLAT-EYE NYLON SLING - SWC21013 >
Electrical Outlet Strips
1.156" X 2.066" X .375" OIL SEAL-NAT473427>
