Dodge® 119122 Stock Bore Taper Lock Bushing, 1-7/8 in Dia Bore, 3.38 in Dia Barrel, 1-3/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475096473
-
Manufacturer Part Number119122
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating11600 in-lb
-
TypeStock Bore
-
Screw Size1/2 x 1 in
-
Number of Bolt Holes2
-
Hub Diameter4.38 in
-
Barrel Diameter3.38 in
-
Keyway Size1/2 x 1/4 in
-
Bolt Circle Diameter3-1/4 in
-
Bore Diameter1-7/8 in
-
Overall Length1-3/4 in
- Size 2517 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number2517 X 1-7/8-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
-
Warranty Information
Recently Viewed
Dodge® 119122 Stock Bore Taper Lock Bushing, 1-7/8 in Dia Bore, 3.38 in Dia Barrel, 1-3/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
IDC Select® IDC JA-1-1/8 Finished Bore QD® Bushing, 1-1/8 in Dia Bore, 1-3/8 in Dia Barrel, 2 in Dia Flange, 1 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
ROUND 1" X 1" . USED FOR REMOVING BURRS AND SMOOTHING DIMPLED OR DENTED AREAS IN PIPE-JWH326984 >
1-1/4" 4-LUG FEMALE AIR COUPLING-DXNAM18 >
100% NATURAL FIBER. BONDED IN CAP WITH HANG-UP HOLE IN HANDLE
-JWH601659 >
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
