Dodge® 117167 Stock Bore Taper Lock Bushing, 1-7/16 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475493623
-
Manufacturer Part Number117167
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating7150 in-lb
-
TypeStock Bore
-
Screw Size7/16 x 7/8 in
-
Number of Bolt Holes2
-
Hub Diameter3.88 in
-
Barrel Diameter2-3/4 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter2.63 in
-
Bore Diameter1-7/16 in
-
Overall Length1-1/4 in
- Size 2012 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number2012 X 1 7/16-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Catalog
-
Specification Sheet
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Dodge® 117167 Stock Bore Taper Lock Bushing, 1-7/16 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
CLAMP LAMP--PORCELAIN SOCKET-JWH516418 >
Loctite® 135543 lb 771™ 1-Part Anti-Seize Lubricant, 1 lb Brush-In Cap Bottle, Paste Form, Gray, 1.1000000000000001
LOCTITE LB 771® is a heavy-duty, high temperature, anti-seize lubricant that resists galling and corrosion and reduces wear in heavy pressure applications. It contains tenacious metals, oils and graphite materials which cannot be burned away or removed by slow moving parts. It is exceptionally resistant to attack by acids, ammonia, acetylene and vinyl monomer.LOCTITE LB 771 reduces friction for tight assembling of stainless steel threads and press fits. Allows easy disassembly of parts after exposure to corrosive or hot environments. Typical applications include lubricating drop forge dies and hammers, catalyst bed and reaction chamber supports, conveyor chains, and chemical plant bolts for pump housings and pipe flanges. It also lubricates and seals pipe threads in acid environments and coats gaskets in high temperature applications.
IKO IRB1416 Inch Series Inner Ring, 7/8 in ID x 1-1/8 in OD, 25.78 mm OAW, For Use With BA1816Z/BHA1816Z and YB1816 Shell Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. These rings are designed to provide a durable surface for shell-type needle roller bearings with non-machined raceways in-type IRB series shaft diameters range from 5/16 to 2-1/2 in.
THRUST BALL BEARING-NTN51104 >
LENS REFRACTOR REPLACEMENT LENS-JWH508772 >
