Dodge® 119118 Stock Bore Taper Lock Bushing, 1-5/8 in Dia Bore, 3.38 in Dia Barrel, 1-3/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475096435
-
Manufacturer Part Number119118
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating11600 in-lb
-
TypeStock Bore
-
Screw Size1/2 x 1 in
-
Number of Bolt Holes2
-
Hub Diameter4.38 in
-
Barrel Diameter3.38 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter3-1/4 in
-
Bore Diameter1-5/8 in
-
Overall Length1-3/4 in
- Size 2517 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number2517 x 1-5/8-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Catalog
-
Warranty Information
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Dodge® 119118 Stock Bore Taper Lock Bushing, 1-5/8 in Dia Bore, 3.38 in Dia Barrel, 1-3/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Browning® 3750445 Taper Lock Bushing, 1-3/8 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
Browning® 3750445 Taper Lock Bushing, 1-3/8 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL, Steel
EC-206 Dodge® 128282 206 Bearing End Cover, 2-1/2 in OD, 1-21/64 in W, Polymer Housing
EC-206 Dodge® 128282 206 Bearing End Cover, 2-1/2 in OD, 1-21/64 in W, Polymer Housing
Gates® Power Transmission Poly Chain® GT®2 14MX-112S-37 Synchronous Sprocket, 1-3/16 to 3-15/16 in Taper-Lock® Bore, 19.54 in OD, 112 Grooves, 19.65 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Gates® Power Transmission Poly Chain® GT®2 14MX-32S-68 Synchronous Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 5-1/2 in OD, 32 Grooves, 5.614 in Dia Pitch, 3.33 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
