Dodge® 117086 Stock Bore Taper Lock Bushing, 1-5/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475509188
-
Manufacturer Part Number117086
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating4300 in-lb
-
TypeStock Bore
-
Screw Size3/8 x 5/8 in
-
Number of Bolt Holes2
-
Hub Diameter3-1/4 in
-
Barrel Diameter2-1/4 in
-
Keyway Size3/8 x 1/8 in
-
Bolt Circle Diameter2.13 in
-
Bore Diameter1-5/8 in
-
Overall Length1 in
- Size 1610 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number1610 X 1 5/8-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
-
Warranty Information
Recently Viewed
Dodge® 117086 Stock Bore Taper Lock Bushing, 1-5/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
1-1/4" APOLLO BRONZE BALL VALVE-NIB7010601 >
CONSOLIDATED BRG H-313 X 2-5/16 Sleeve Adapter, 58.73 mm Dia Inside x 85 mm Dia Outside
CONS H-313 X 2-5/16 Sleeve Adapter, 58.73 mm Dia Inside x 85 mm Dia Outside
MMM 46056 Needle Valve, 1/4 in, FIP, Brass Body, Import
Starrett® 240B Regular Pin Vise With Tapered Collet, 0.025 to 0.075 in Capacity, 3/8 in Dia x 3-43/64 in L, Knurled Grip Handle
The Starrett 240 Double End Pin Vise includes tapered collets. .025-.075" (0.64-1.9mm) Range.
ASP-200-2-SSS Industry Standard Clamping Collar, 2-Piece Construction, 2 in ID x 3 in OD x 11/16 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
