Dodge® 119058 Stock Bore Taper Lock Bushing, 1-5/8 in Dia Bore, 2-1/4 in Dia Barrel, 1-1/2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475096220
-
Manufacturer Part Number119058
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating4300 in-lb
-
TypeStock Bore
-
Screw Size3/8 x 5/8 in
-
Number of Bolt Holes2
-
Hub Diameter3 in
-
Barrel Diameter2-1/4 in
-
Keyway Size3/8 x 1/8 in
-
Bolt Circle Diameter2.13 in
-
Bore Diameter1-5/8 in
-
Overall Length1-1/2 in
- Size 1615 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number1615 X 1 5/8-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
-
Warranty Information
Recently Viewed
Dodge® 119058 Stock Bore Taper Lock Bushing, 1-5/8 in Dia Bore, 2-1/4 in Dia Barrel, 1-1/2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Complete large grinding applications with the 8 in. (205mm) Bench Grinder. Featuring a powerful motor that delivers up to 3,600 rpm for high speed material removal, this durable bench grinder is constructed from rugged cast iron.
Browning® 3750189 Taper Lock Bushing, 1-3/4 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
Browning® 3750189 Taper Lock Bushing, 1-3/4 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
Ingersoll-Rand 107XPA Standard Air Ratchet Wrench, 3/8 in Drive, 54 ft-lb Torque, 160 rpm Speed, 19 cfm Air Flow
Ingersoll-Rand 107XPA Standard Air Ratchet Wrench, 3/8 in Drive, 54 ft-lb Torque, 160 rpm Speed, 19 cfm Air Flow
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Dodge® 023690 315 Type E-Xtra Pillow Block Roller Bearing Unit, 3-15/16 in Dia Bore, 12-1/4 to 12-3/4 in L Bolt Center-to-Center, 4-1/4 in Base to Bore Centerline, 15-1/4 in OAL 8.44 in OAH
Dodge® 023690 315 Type E-Xtra Pillow Block Roller Bearing Unit, 3-15/16 in Dia Bore, 12-1/4 to 12-3/4 in L Bolt Center-to-Center, 4-1/4 in Base to Bore Centerline, 15-1/4 in OAL x 8.44 in OAH
