Dodge® 117165 Stock Bore Taper Lock Bushing, 1-3/16 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475492817
-
Manufacturer Part Number117165
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating7150 in-lb
-
TypeStock Bore
-
Screw Size7/16 x 7/8 in
-
Number of Bolt Holes2
-
Hub Diameter3.88 in
-
Barrel Diameter2-3/4 in
-
Keyway Size1/4 x 1/8 in
-
Bolt Circle Diameter2.63 in
-
Bore Diameter1-3/16 in
-
Overall Length1-1/4 in
- Size 2012 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number2012 X 1 3/16-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Warranty Information
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Dodge® 117165 Stock Bore Taper Lock Bushing, 1-3/16 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Dichtomatik 75102159 O-Ring, 237 Dash Number, 3.359 in ID x 3.637 in OD, FKM, 75 Shore A Durometer, Import, Custom 237-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Weiler® 15302 Small Diameter Wheel Brush, 1-1/2 in Dia Brush, 1/4 in W Face, 0.006 in Dia Crimped Filament/Wire, 3/8 in Arbor Hole
Weiler® 15302 Small Diameter Wheel Brush, 1-1/2 in Dia Brush, 1/4 in W Face, 0.006 in Dia Crimped Filament/Wire, 3/8 in Arbor Hole
Gates® Power Transmission Super HC® PowerBand® 5/5V670 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 67 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Square D™ QO™ QOB270 Standard Miniature Circuit Breaker, 120/240 V AC, 70 A, 10 kA Interrupt, 2 Poles, Thermal Magnetic Trip
QO and QOB one, two and three pole thermal magnetic circuit breakers provide overcurrent protection and switching on ac and dc systems. These circuit breakers have an over center, trip free toggle mechanism with quick make, quick break action and positive handle indication. They also have VisiTrip trip indication, which provides a visual indication that the circuit breaker has tripped and interrupted the circuit. A full line of features and factory installed accessories are also available such as shunt trips, auxiliary switches and alarm switches. This 2 pole QO circuit breaker is rated at 70A at 120/240VAC. This unit provides 10kA breaking capacity and bolt on mounting. QO circuit breakers are UL Listed under UL File E84967 and are CSA Certified under CSA Master Contract 153555.
MORSE® 11486 1330 General Purpose Jobber Length Drill Bit, 15/32 in Drill - Fraction, 0.4688 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
