Dodge® 119119 Stock Bore Taper Lock Bushing, 1-11/16 in Dia Bore, 3.38 in Dia Barrel, 1-3/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475096442
-
Manufacturer Part Number119119
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating11600 in-lb
-
TypeStock Bore
-
Screw Size1/2 x 1 in
-
Number of Bolt Holes2
-
Hub Diameter4.38 in
-
Barrel Diameter3.38 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter3-1/4 in
-
Bore Diameter1-11/16 in
-
Overall Length1-3/4 in
- Size 2517 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number2517 X 1-11/16-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Catalog
-
Specification Sheet
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Dodge® 119119 Stock Bore Taper Lock Bushing, 1-11/16 in Dia Bore, 3.38 in Dia Barrel, 1-3/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
30 TOOTH SPROCKETS FOR #35 CHAIN -IDC35B30F5/8 >
MORSE® 43138 1888 Ball Nose Center Cutting Extended Length Single End End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/16 in OAL, Bright
5-MM-PITCHX375-MM TIMING BELT-JAS3755M32 >
FOAM PLASTIC BRASS WIRE WHITE SIDEWALL BRUSH - MAG6BP >
