MasterDrive H13/16 H Series Double Split Tapered Bushing, 3/16 in Dia Bore, 1-5/8 in Dia Barrel, 2-1/2 in Dia Flange, 1-11/32 in OAL, Powdered Metal
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
-
BrandMasterDrive
-
UPC806372017314
-
Manufacturer Part NumberH13/16
-
CountryUSA
-
MaterialPowdered Metal
-
Flange Diameter2-1/2 in
-
Flange Thickness11/32 in
-
Torque Rating95 in-lb
-
TypeDouble Split
-
Screw Size1/4 x 1 in
-
SeriesH Series
-
Barrel Diameter1-5/8 in
-
Keyway Size3/16 x 3/32 in
-
Bolt Circle Diameter2 in
-
Bore Diameter3/16 in
-
Overall Length1-11/32 in
- Double split barrel provides better concentricity to the shaft
- 3/4 in per ft Taper on the barrel
- Highest degree of mechanical component locking
-
Alternative Part Number2105004616
-
Package DescriptionEACH
-
Catalog
-
Line Drawing
Recently Viewed
MasterDrive H13/16 H Series Double Split Tapered Bushing, 3/16 in Dia Bore, 1-5/8 in Dia Barrel, 2-1/2 in Dia Flange, 1-11/32 in OAL, Powdered Metal
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
Wilton® WL9-28824 Multi-Purpose Bench Vise, Serrated Jaw, 5 in Jaw Opening, 5-1/2 in W Hardened Steel Jaw, 2-3/4 in D Throat
Wilton® Multi-Purpose Bench Vise is ideal for light tradesman, utility, MRO and general purpose use. This vise features a 360 deg rotating head to clamp material at any angle, 30 deg indexing increments for quick set up, replaceable pipe jaws and a V-jaw to easily hold round objects vertically. The body and movable jaw are 30000 psi gray cast iron and the base is 60000 psi ductile iron, providing durability through a wide range of applications.
JET® JT9-441310 SJ Series Heavy Duty Screw Jack, 10 ton Load, 11-1/2 in H Min, 17-13/16 in H Max, 8-5/16 in L Screw
Jet® SJ series screw jack is available in five capacities ranging from 5 to 25 tons that hold the load without creeping. The cast bell shaped housing provides stability while the jack design requires less effort to raise the load increasing productivity.
SM SB9STR01.0 Pipe Fitting
Many accessories accompany the Browning® shaft mount reducer. These accessories are designed to provide installation flexibility, improved performance and safety.
1-1/2 -FEMALE PIPE THREAD 45-D GALVANIZED ELBOW
