Browning® 1079136 Split Taper Bushing, 2-5/8 in Dia Bore, 2.7657 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 2-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
-
BrandBrowning®
-
UPC662289199914
-
Manufacturer Part Number1079136
-
CountryUSA
-
MaterialSintered Steel
-
Flange Diameter4-1/8 in
-
Flange Thickness17/32 in
-
Screw Size3/8 x 1-1/4 in
-
Number of Bolt Holes3
-
Barrel Diameter2.7657 in Small End/2.875 in Large End
-
Keyway Size5/8 x 5/16 in
-
Bolt Circle Diameter3-3/8 in
-
Bore Diameter2-5/8 in
-
Overall Length2-1/2 in
-
Suitable For Use WithBrowning® Multiple Groove Sheave
- Solid Flange and Double Split Barrel - Assures better concentricity to the shaft
- Key to Key Drive - With keys on both the shaft and product to provide the strongest possible drive
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- Flat face pulley idler
- Ductile iron
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
-
Alternative Part NumberQ1 2 5/8
-
UNSPSC31171605
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® 1079136 Split Taper Bushing, 2-5/8 in Dia Bore, 2.7657 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 2-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
#10X4" DRYWALL SCREWS--BOX OF 1000-JWH701858 >
BUGLE HEAD COARSE THREAD. FOR ATTACHING GYPSUM BOARD TO WOOD STUDS. NO. 2 REDUCED PHILLIPS RECESS. THIS SCREW IS CONSTRUCTED OF HARDENED STEEL WHICH IS THE RESULT OF CARBON STEEL BEING PUT THROUGH HEAT TREATMENT, QUENCHING, AND FURTHER REHEATING MAKING IT EXTREMELY DURABLE. HARDENED STEEL IS MORE RESISTANT TO WEAR, CORROSION, AND ABRASION.
-JWH701416 >
3/4" X 24" WRECKING BAR - JWH302103 >
1/8" X 2.5" SLOT POCKET SCREWDRIVER-JWH376191 >
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
