Browning® 1079425 Split Taper Bushing, 2-1/2 in Dia Bore, 2.7032 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
-
BrandBrowning®
-
UPC662289250196
-
Manufacturer Part Number1079425
-
CountryUSA
-
MaterialSintered Steel
-
Flange Diameter4-1/8 in
-
Flange Thickness17/32 in
-
Screw Size3/8 x 1-1/4 in
-
Number of Bolt Holes3
-
Barrel Diameter2.7032 in Small End/2.875 in Large End
-
Keyway Size5/8 x 5/16 in
-
Bolt Circle Diameter3-3/8 in
-
Bore Diameter2-1/2 in
-
Overall Length3-1/2 in
-
Suitable For Use WithBrowning® Multiple Groove Sheave
- Solid Flange and Double Split Barrel - Assures better concentricity to the shaft
- Key to Key Drive - With keys on both the shaft and product to provide the strongest possible drive
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
-
Alternative Part NumberQ2 2 1/2
-
UNSPSC31171605
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® 1079425 Split Taper Bushing, 2-1/2 in Dia Bore, 2.7032 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Gates® Power Transmission PowerGrip® HTD® 5000-20M-115 Synchronous Belt, 115 mm W, 5000 mm OAL, 20 mm Pitch, 250 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
JASON C60 C-SECTION, NATURAL RUBBER/SBR/POLYESTER, 64" OUTSIDE LENGTH, 7/8" TOP WIDTH, 17/32" THICK
V-BELT C SERIES. 64" BELT OUTSIDE LENGTH;7/8" BELT WIDTH; 1 BAND; POLYESTER TENSILE MATERIAL, RUBBER OUTER MATERIAL
-JASC60 >
Browning® Classical Gripbelt® 1028133 BK Series Type 2 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 3-3/4 in OD, 3.2 in (A)/3.7 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028133 BK Series Type 2 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 3-3/4 in OD, 3.2 in (A)/3.7 in (B) Dia Pitch, 7/8 in W Face
Ball Peen Hammer with forged high-carbon steel head is hardened for additional durability
Crowned face with uniform bevel
Features a smoothly rounded peen
Straight-grain hickory handle is stained and lacquered to withstand weather
Made in USA
Overall Length: 15-Inches
Weight: 2 pounds
Transport chain is considered the chain of choice for load binding applications. It is also well suited for tie-downs, towing and logging operations. Engineered for maximum strength, this domestic transport chain is made from heat treated carbon strength steel. Heat treatment is associated with increased steel strength which improves product performance. Its strength to weight ratio exceeds that of proof coil and high-test. This chain meets department of transportation regulations and is permanently stamped with its working load limit every ten links. Order unit is foot. Not for overhead lifting.
