Browning 1-5/16"-ID QD SK-STYLE BUSHINGS BRW SK-1.5/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood's®
-
UPC698672701051
-
Manufacturer Part NumberSK15/16
-
CountryUSA
-
MaterialCast Iron
-
Flange Diameter3-7/8 in
-
Flange Thickness1/2 in
-
Torque Rating7000 in-lb
-
TypeStandard
-
Screw Size5/16-18 x 2 in
-
Number of Bolt Holes3
-
Barrel Diameter2-13/16 in
-
Keyway Size1/4 x 1/8 in
-
Bolt Circle Diameter3.313 in
-
Bore Diameter15/16 in
-
Overall Length1.88 in
- Size SK bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
ARC™ 12241 Premium Mounted Coated Abrasive Flap Wheel, 2 in Dia, 1 in W Face, 1/4-20 Dia Shank, 60 Grit, Coarse Grade, Aluminum Oxide Abrasive
Mounted and unmounted flap wheels are a great choice for light grinding, blending, deburring and finishing applications on a variety of metals. Flap wheels conform to many geometries and the radial flap design provides a continuous supply of fresh grain for consistent cutting action. Mounted flap wheels are most commonly used on die grinders.
RBC® HexLube® CS48LW CS-LW Needle Roller Crowned Cam Follower, 1-1/2 in Dia x 7/8 in W Roller, 5/8 in Dia x 1-1/2 in L Stud, Chrome Steel Roller
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
HCI Preferred Supplier 940175L Ball Valve With Locking Handle, 1 in Nominal, NPTF End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
HCI Preferred Supplier 940175L Ball Valve With Locking Handle, 1 in Nominal, NPTF End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
Littelfuse® MAX30 MAXI™ 299 Slow Blow Time Delay Automotive Fuse, 30 A, 32 V DC, 1 kA Interrupt
MAXI™ fuses are primarily used for under hood applications and are produced with a high temperature polymer and silver plated blades. They replace the commonly used fusible wire or fusible link to protect a high current segment or system of the wiring harness. Features Littelfuse designed industry standard color coding to indicate amp rating.
MORSE® 43272 1895 Double End Non-Center Cutting Regular Length End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
MORSE® 43272 1895 Double End Non-Center Cutting Regular Length End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
